Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Craig A Moore on November 09, 2016, 03:25:21 pm

Title: Dry Fusion
Post by: Craig A Moore on November 09, 2016, 03:25:21 pm
Is this as good as they say ?
Title: Re: Dry Fusion
Post by: CleanerCarpets on November 09, 2016, 05:05:22 pm
Haven't used their solutions for a long time so can't comment on them - they use to be very expensive in use as they were diluted at 1 to 4 but i think its a bit better at 1 to 10 now.

As regards the machine - you are better off with a standard rotary with the motor fixed centrally as they are more stable. Also the heat does heat the plate very well but doesn't get through the pad to the carpet as its suppose to. In my opinion - cleaning with a heated rotary will not give better drying times over using one without heat if exactly the same amount of product was applied with both.
Title: Re: Dry Fusion
Post by: tim handley on November 09, 2016, 06:41:55 pm
 used to love mine but as above, i get same or better results with a good rotary and good encap/bonnet solutions and less fath. they are quite heavy, the  drive board gets clogged fairly quickly and are a pain to clean, and considering the price they are, i would just get a good rotary...........
Title: Re: Dry Fusion
Post by: Craig A Moore on November 09, 2016, 07:13:28 pm
never cleaned this way so may try in new year
Title: Re: Dry Fusion
Post by: creighton foyle on November 11, 2016, 03:40:51 pm
i love using dry fusion, chems are pricey compared to others but very effective .
Title: Re: Dry Fusion
Post by: tonner0 on November 14, 2016, 09:17:19 pm
Bought my first Dry Fusion machine and set up about ten years ago and over the first few years that I used it I was continually surprised at how it would get quite badly soiled carpets looking good and the customers love it as their carpets are dry so quickly. Easy to use too. Their Unbelievable spotter is good on a lot of stains too.
Title: Re: Dry Fusion
Post by: CarPete Cleaning on November 15, 2016, 07:58:36 am
Been using Dry Fusion for around 8 years now.  The Re-Act solution dilutes 1:10, so not as costly as the old Activator which was 1:4.  I get great results with the system and fast drying with the heat.  Would thoroughly recommend.