Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Smurf on October 30, 2016, 10:09:14 am
-
I know theses have been around for a few years before someone comments. lol
However I'm interested to find out if anyone is still using spring one shot remotes and if they are good or not?
Reason being I'm looking at updating my controllers in the near future and want the option to be able to turn the pumps off completely without having to go back and forth to the van. This would come in very handy for me especially when using a hot water heater for pure and/or softwash chemicals. Meaning not having the controller’s dead end detection keep cutting in when turned off at the pole and the pumps continue to pulse building up pressure in the hoses. Thus saving wear & tear on the pumps and reducing the risks of hose leaks etc.
I see Gardiners have them on sale too bundled with certain controllers. http://gardinerpolesystems.co.uk/sale-67.html
-
Anyone ::)roll
-
Come on lads I'm waiting for feedback so I can send my letter to Santa with my list as I've been a very good boy this year. lol.
-
Come on lads I'm waiting for feedback so I can send my letter to Santa with my list as I've been a very good boy this year. lol.
;D
Ive no idea, not used one. Sorry it doesnt help, but might get others to comment ::)roll
-
Never mind Nathan, thanks for the reply. Anyway Santa's list is now in the post... Knowing my luck I will get a lump of coal lol
-
I had a go on one a few years back as somebody I know had bought a system with one installed and was selling up.
All I can say is it worked but it wasn't something I needed, I think they still use a small amount of power even when the pump is switched off but how that will effect the battery over the working day I don't know.
-
Got a pair of them installed in my van. Don't use em.
-
Got a pair of them installed in my van. Don't use em.
Why not?
How did you install them?
-
Got a pair of them installed in my van. Don't use em.
Why not?
How did you install them?
Installed when I bought the system from Grippa tank.
As I have a roller system the doors are locked. So they struggle. PLUS Grippa mount them behind a metal
Cover lol
-
So in other words was a totally waste on money if they were not roof mounted lol
-
Yeah :D
-
I betting you said no yer not cutting any holes in me roof too ;D
-
I did actually.
The idea was to mount them under the van but never got round to it.
-
Under the van would not be any good surely ???
Mind would work a bit better than shut in a steel box I suppose ;D
-
Yeah we extended wires it worked better.
-
I'm sure I have a spring remote control knocking about in the shed, it was fine when I used it but had in van few years never really used so when I changed out hot water system it's been put in shed with controller
Any one wants it with a sensible offer I'll go search through my boxs
07944237635
Tony
-
This would come in very handy for me especially when using a hot water heater for pure and/or softwash chemicals. Meaning not having the controller’s dead end detection keep cutting in when turned off at the pole and the pumps continue to pulse building up pressure in the hoses. Thus saving wear & tear on the pumps and reducing the risks of hose leaks etc.
I'm not speaking from experience here as I use a trolley with a much shorter hose. However, could you not achieve what you're after by calibrating your gear to a lower pressure so your gear will never be subjected to pressures higher than say 40psi for example?
-
Thanks I already have the controllers de set quite low.
Would like the option also to be able to shut down the pumps altogether and start them again when I want remotely. Especially when using softwash chems and/or hot water on long run of hose.
Spring also do a one shot remote that you can increase/decrease the flow of the pump remotely which you can’t really do that with a gizmo at the pole very well if at all.
Regards to the extra draw on the batteries with the comment they may not last a day if working with one shot remotes. The type of jobs I do I and how my van is set up I can run off mains power whilst the pump batteries are charging if need be so I don't envisage that being an issue myself. Goes without saying will also carry spare remote fobs and spare batteries in the van too.
-
OK I've had a little experience with remotes over the years I've tried several types over the years, I ran several full threads about remotes and upgrading signal etc, Alex at gardiner can vouch for me and my knowledge, best advice is match areials to correct frequency and choice Wisley the antennas as it can really make a big difference, I've done backpacks with remotes to freedom trolly to van systems about 9 years ago, shame some of old forums don't exist anymore so years of threads like them are lost, but it's not rocket science, but you will need small stubby aerial on van east to make small hole an use tiger seal to waterproof it halfords do it aboutique 11 quid a tube but you'll find other uses for it like leaky gutters etc, here a link you'll need too, https://www.rfsolutions.co.uk/antennas-c8 sorry old threads are gone but some will remember them, I still use remotes to this day, I hope this helps
-
So are you saying the one shot remote antenna is no good?
-
good standard but there is better versions out there look carefully through the link find correct frequency ie 433mhz etc look for better gain, it's like my remote controlled bait boat had standard antenna but with improvement of them it goes further than it should. same with rca helicopter, or petrol rca car, everything can be slightly improved in someway over standard factory release products, that's why I'm a tinkerer and always look to improve or modify to suit my needs, I'm finally run through projects and in two weeks I'm free, but want take long before I start looking for ideas or helping do projects, I have to keep brain going I've worked on many things with Alex for our industry then fishing one offs or testing even down to new baits, I've been working as a part time gunsmith over last couple of years in tuning an experiments even down to modify valve sets for pcp, but it's time to return some old thoughts back to our industry for a while , it goes full circle as I have contacts in each field but can't do them all at once a year or so in each would be ideal but doesn't always workout that way, plus my family require me then so does local farmers for pest control, I never seem to stop, but I'm gonna slow down spent a set time in each area at a time, now it's back to wfp
-
good standard but there is better versions out there look carefully through the link find correct frequency ie 433mhz etc look for better gain
Thanks...got a link to the one you would suggest
-
find one that will suit your requirements, good luck
-
Many thanks, I will test the range first and if need be have a look ;)