Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: W.booler on September 10, 2016, 08:21:47 am

Title: Which fitting?
Post by: W.booler on September 10, 2016, 08:21:47 am

Hi guys. I have a diy setup, double di in the van.. I'm setting a two man system up, so two pumps and controllers and hoses. Which fitting do I need to buy to feed the second hose. I'm guessing there is a John  Guest Y fitting that does this?  Thanks in advance....

Title: Re: Which fitting?
Post by: Spruce on September 10, 2016, 09:46:03 am

Quote from: W.booler on September 10, 2016, 08:21:47 am

Hi guys. I have a diy setup, double di in the van.. I'm setting a two man system up, so two pumps and controllers and hoses. Which fitting do I need to buy to feed the second hose. I'm guessing there is a John  Guest Y fitting that does this?  Thanks in advance....

1 x
http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/john-guest-fittings/1-2-fittings/john-guest-a-equal-tee.html

3 x
http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/john-guest-fittings/1-2-fittings/a-john-guest-stem-to-a-barb.html

3 x
either
http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/hose-clamps-o-clips/o-clips/inner-ring-o-clip-hose-clamp-stainless-steel-11-5mm-13-5mm.html

or

http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/hose-clamps-o-clips/o-clips/inner-ring-o-clip-hose-clamp-stainless-steel-12-4mm-14-4mm.html

depending on the outer size of your hose

0r

3 x jubilee clips (which never seem to work for me).


You could use one of these
http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/fittings-barbs-adapters-etc/hose-fittings-barb-to-barb/13mm-t-connector.html

.

Title: Re: Which fitting?
Post by: W.booler on September 10, 2016, 09:52:21 am

Thanks for that Spruce. Much appreciated.  :)