Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: kempy on September 03, 2016, 06:58:41 pm

Title: Convert to 4 jets T piece push fit
Post by: kempy on September 03, 2016, 06:58:41 pm

Anyone know where to buy them from
Garfiners do a 4 way Push fit , but only 6mm

Title: Re: Convert to 4 jets T piece push fit
Post by: kempy on September 03, 2016, 07:00:26 pm

http://gardinerpolesystems.co.uk/all-products/water-fed-poles/brushes/brush-fittings-jets-sockets-scrapers/push-fit-4-way-t-connector-for-quick-loq-system.html

Title: Re: Convert to 4 jets T piece push fit
Post by: kempy on September 03, 2016, 07:00:41 pm

But need 8mm

Title: Re: Convert to 4 jets T piece push fit
Post by: Smurf on September 03, 2016, 08:39:32 pm

Nothing is ever simple is it kempy. I've spent at least 40 mins trying to find 8mm without the 6mm reducers with no luck either for you.  :(

Title: Re: Convert to 4 jets T piece push fit
Post by: jk999 on September 03, 2016, 09:28:48 pm

A few years ago i put four jets in a brush head and it made all four jets like pencil jet even on high power so went back to two jets

Title: Re: Convert to 4 jets T piece push fit
Post by: SeanK on September 03, 2016, 10:25:38 pm

All you need is three 8mm T which will do the same job.

Title: Re: Convert to 4 jets T piece push fit
Post by: duncan h on September 04, 2016, 03:47:16 pm

Quote from: jk999 on September 03, 2016, 09:28:48 pm

A few years ago i put four jets in a brush head and it made all four jets like pencil jet even on high power so went back to two jets

+1