Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: Matt. on August 16, 2016, 12:50:44 pm

Title: Little help needed please
Post by: Matt. on August 16, 2016, 12:50:44 pm

(http://www.cleanitup.co.uk/smf/1471347845_image.jpg)

Av sprung a leak just were the screw thread is to the right of pressure handle, I need to take it off to fix but unsure ifs it's straight forward, as water inlet at the bottom prevents it's from turning
(http://www.cleanitup.co.uk/smf/1471347841_image.jpg)

Any ideas guys

Thanks
Matt

Title: Re: Little help needed please
Post by: chris scott on August 16, 2016, 11:16:08 pm

It went in there ...so it will come out.

It might be a case of removing the green part of the inlet filter ...then remove the inlet filter . Then the unloader. You might have to tilt the unloader slightly  so everything  will miss.

Title: Re: Little help needed please
Post by: Matt. on August 17, 2016, 06:58:05 am

Nice one chris

But that sounds to complicated to me an yes the green filter would have to come off to get a turn.

Hoping to catch peter forrester this morning on Kirkby industrial estate to see if he can do it today for me

Title: Re: Little help needed please
Post by: Ben Marriott on August 17, 2016, 11:33:32 pm

Dual build, will need the filter removing to replace the nipple in the head. Take 5 mins with a few spinners to help you.

Title: Re: Little help needed please
Post by: Matt. on August 18, 2016, 08:15:21 am

Didn't manage to get someone to do it so had a bash meself last night,

Was as easy as both u an Chris says, filter off and Inlet, then remove handle and plenty of room to take off, looking forward to getting back to work with it today