Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: richard groves on July 25, 2016, 06:18:25 pm

Title: jammed uni valve
Post by: richard groves on July 25, 2016, 06:18:25 pm
Mine stopped working this afternoon, jammed in the on position so fortunately able to continue working. But as I have a tubeless kit fitted also its going to be a ball ache to remove it and check to see if its un-jammable.
Has this happened to anybody else yet ? can it just get stuck and be freed or is it more the case just replace it ?
( 6 months daily use ) Thanks.
Title: Re: jammed uni valve
Post by: Smurf on July 25, 2016, 06:21:38 pm
Never use one but I'm sure if you contact the supplier they will send out a replacement for you.
Title: Re: jammed uni valve
Post by: richard groves on July 25, 2016, 08:53:40 pm
So, I've taken it out of the pole but not removed the hose ( I need to work tomorrow and don't have time to faff about replacing fittings or putting a flow valve back on reel hose ) .The mechanism still works when you pull it but does not turn water off so guessing its shot as its a sealed unit .  :(
Anybody else had one fail yet ?
Looked on exceeds website and can see nothing that mentions a guarantee  ???
Top product though - 6 months issue free. Saved me so much in water and time in the working day - not looking forward to working tomorrow without it now  :(
Title: Re: jammed uni valve
Post by: Lee GLS on July 25, 2016, 10:13:37 pm
There is an o ring that pops off inside you can take them apart, but if you contact Steve he will post you out a new one under warranty.
Title: Re: jammed uni valve
Post by: richard groves on July 25, 2016, 10:54:44 pm
That's good to know Lee, thank you.
Title: Re: jammed uni valve
Post by: steven jonesg on July 29, 2016, 02:55:27 pm
So, I've taken it out of the pole but not removed the hose ( I need to work tomorrow and don't have time to faff about replacing fittings or putting a flow valve back on reel hose ) .The mechanism still works when you pull it but does not turn water off so guessing its shot as its a sealed unit .  :(
Anybody else had one fail yet ?
Looked on exceeds website and can see nothing that mentions a guarantee  ???
Top product though - 6 months issue free. Saved me so much in water and time in the working day - not looking forward to working tomorrow without it now  :(

Hi Barry,

Email your address to me @ sales@ex-ceedinnovation.co.uk
I will send a new one right away.

Steve.
Title: Re: jammed uni valve
Post by: M & C Window Cleaning on July 29, 2016, 04:00:23 pm
So, I've taken it out of the pole but not removed the hose ( I need to work tomorrow and don't have time to faff about replacing fittings or putting a flow valve back on reel hose ) .The mechanism still works when you pull it but does not turn water off so guessing its shot as its a sealed unit .  :(
Anybody else had one fail yet ?
Looked on exceeds website and can see nothing that mentions a guarantee  ???
Top product though - 6 months issue free. Saved me so much in water and time in the working day - not looking forward to working tomorrow without it now  :(

Hi Barry,

Email your address to me @ sales@ex-ceedinnovation.co.uk
I will send a new one right away.

Steve.

That's what I call service.
Title: Re: jammed uni valve
Post by: richard groves on July 29, 2016, 04:01:07 pm
Thank you Steve, just sent you an email.
Title: Re: jammed uni valve
Post by: richard groves on July 29, 2016, 04:01:40 pm
So, I've taken it out of the pole but not removed the hose ( I need to work tomorrow and don't have time to faff about replacing fittings or putting a flow valve back on reel hose ) .The mechanism still works when you pull it but does not turn water off so guessing its shot as its a sealed unit .  :(
Anybody else had one fail yet ?
Looked on exceeds website and can see nothing that mentions a guarantee  ???
Top product though - 6 months issue free. Saved me so much in water and time in the working day - not looking forward to working tomorrow without it now  :(

Hi Barry,

Email your address to me @ sales@ex-ceedinnovation.co.uk
I will send a new one right away.

Steve.

That's what I call service.
+ 1  ;)
Title: Re: jammed uni valve
Post by: stevon on July 29, 2016, 05:26:24 pm
mine jammed also last week,sent it back at my own expense(signed for)also sent an email-that I would cover postage???no response,will have to wait & see!!, ???
Title: Re: jammed uni valve
Post by: stevon on July 29, 2016, 05:58:20 pm
already got in touch-sending one Monday-perfect-thanx steve
Title: Re: jammed uni valve
Post by: duncan h on July 29, 2016, 09:39:59 pm
mine jammed in the off position on 2 occasions. Threw it van and dug my old innovation pole and aqua dapter out. Finished days work then tried it again. All ok :( odd