Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: C-Thru. on July 20, 2016, 10:12:31 pm
-
Hi Guys,
Started to do a few Render cleaning jobs here in Devon where we get three different algae's, Black, Green and Red.
the red stuff is a bugger to remove, usually takes two - three applications of Neat hypo.
My questions are these
1. What is best pump / sprayer to use for application? I used a 5 litre pump sprayer but seemed bit slow and spent as much time pumping as I did spraying.
Would hypo corrode a WFP pump?
2. Do you guys who use Hypo water it down or go neat? if watered down at what ratio?
Thanks in advance fella's, much appreciated.
Goochie
-
Neat hypo (SH) will destroy most pumps known to man no matter what they say ;D
Also not very wise to go spraying neat hypo about either especially on vertical surfaces.
-
Neat hypo (SH) will destroy most pumps known to man no matter what they say ;D
Also not very wise to go spraying neat hypo about either especially on vertical surfaces.
Why not on Vertical surfaces ?.
-
That was one of my questions.
At what ratio do you guys water Hypo down?
-
Just go to benz website and browse about as ben has loads of info and vids on there bud that might help.
-
Just go to benz website and browse about as ben has loads of info and vids on there bud that might help.
Benz Website?? any links?
-
Just go to benz website and browse about as ben has loads of info and vids on there bud that might help.
Benz Website?? any links?
https://www.benzsoftwash.com/pages/benz-blackwash
-
https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwi-qqqpgIXOAhUPOsAKHaJeB8cQFggcMAA&url=https%3A%2F%2Fwww.benzsoftwash.com%2Fpages%2Fbenz-blackwash&usg=AFQjCNHdpStqBum1crqL9MgrPAlwj-6_fA&sig2=86hOoEMC2_05ZvZhjSf3Gg