Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: from edge2edge on July 17, 2016, 06:43:12 pm

Title: sensei pump ugrade
Post by: from edge2edge on July 17, 2016, 06:43:12 pm

Got  a sensei with 70psi which i am considering  changing for a 150 psi version.I have the best vac available 3 stage which sucks well so i think there should be no problem there just wondered if anyone had experience of this(or similar) setup.All help / info always appreciated guys..............Alan

Title: Re: sensei pump ugrade
Post by: john martin on July 17, 2016, 08:14:25 pm

should be no problem , stick it in . 70psi must be painfull at times .

How bout getting airflex booster and connecting it to the exhaust when u need it .

Title: Re: sensei pump ugrade
Post by: from edge2edge on July 17, 2016, 09:19:17 pm

Thanks for that John yes 70 psi just not enough sometimes(i have storm in the van for most jobs but flats etc need smaller unit) and yes giving some serious consideration to the extra vac..................Alan

Title: Re: sensei pump ugrade
Post by: from edge2edge on July 21, 2016, 05:14:27 pm

Got the 150 psi today so my mate Jon is going to fit it tomorrow(friday).I a  assume its quite straight forward?

Title: Re: sensei pump ugrade
Post by: Adrian Evans on July 21, 2016, 10:02:35 pm

Not a lot of room in the sensei, the 135 shurflo that's normally in there is smaller than a 150psi shurflo  and it's a tight fit.
I did manage to upgrade a pump on a sensei i had years ago but had to use the Amatek 150psi pump as it's smaller than a shurflo one and that too was a very tight fit..

Title: Re: sensei pump ugrade
Post by: from edge2edge on July 22, 2016, 05:49:15 am

Thanks for that info mate i will let Jon know............Alan