Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: DeLuce on May 08, 2016, 08:28:26 pm

Title: Xtreme pole with Ex-ceed set-up?
Post by: DeLuce on May 08, 2016, 08:28:26 pm

Anybody use this system with their Xtreme?
Was thinking of buying the kit to keep my van tidy. But seem to remember that there was some problems with putting it onto an Xtreme pole? Maybe I got it wrong  ???

Title: Re: Xtreme pole with Ex-ceed set-up?
Post by: tlwcs on May 09, 2016, 05:17:48 pm

The tubeless conversion should be ok and also the univalve, but I would email Alex just to be sure
I think it was the Aqua dapter that he said not to fit as it put too much strain on the pole. But again, I would check with him
Tony

Title: Re: Xtreme pole with Ex-ceed set-up?
Post by: robert mitchell on May 09, 2016, 05:45:01 pm

i was told the tubeless set up works fine with the extreme without cutting any sections , dont know if thats still true of the mk3 though .

Title: Re: Xtreme pole with Ex-ceed set-up?
Post by: DeLuce on May 09, 2016, 06:22:01 pm

Thanks for the replies. I've got the older Xtreme so should be OK then  ;D

Title: Re: Xtreme pole with Ex-ceed set-up?
Post by: robert mitchell on May 09, 2016, 08:44:18 pm

Quote from: Rigsby on May 09, 2016, 06:22:01 pm

Thanks for the replies. I've got the older Xtreme so should be OK then  ;D

If you look into the bottom of an extreme the top section ends a few inches up inside the pole , which is enough for the connecter to stay inside pole , if you compare to slx the sections all meet up bar a few mm at the bottom of the pole so you have to cut top section to get connector to stay inside pole.

Title: Re: Xtreme pole with Ex-ceed set-up?
Post by: Tony dunmall on May 09, 2016, 09:19:55 pm

I've converted all extremes in both can not an issue with univalve and tuboess kit

Title: Re: Xtreme pole with Ex-ceed set-up?
Post by: DeLuce on May 09, 2016, 09:50:39 pm

OK, thanks, that's great info 👍