Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Brendan (chem2clean) on April 09, 2016, 12:57:02 am

Title: 4 jet wand
Post by: Brendan (chem2clean) on April 09, 2016, 12:57:02 am

What's the difference than your usual lighter2 jet wand. Good and bad? Thanks.

Title: Re: 4 jet wand
Post by: john martin on April 09, 2016, 05:45:54 pm

getting one so iv being looking at them , others might have experience of using them  .

Weight depends on materials , some are all titanium or part titanium so may be lighter than two.
If you want a low profile head u would need at least four jets to get the spray coverage especially if u go over 12"
A low profile head is probably needed to facilitate a swivel action on the newer wands if u want that .
Multiple specific  angled jets probably have some pressure/flow advantages over two jet .

Title: Re: 4 jet wand
Post by: Mike Halliday on April 10, 2016, 07:06:08 am

4 jets give a more even coverage over the width of the head and can be lower so theoretically there is less heat loss within the spray. It also has the ability to give more flow so the flushing action is greater but with a portable this would mean the tank would empty quicker.

My pet hate with multiple jet wands is the cost of replacing the jets :'( and if some crap gets into the solution you have to unscrew &  unblock 4 jets

Title: Re: 4 jet wand
Post by: Brendan (chem2clean) on April 10, 2016, 05:13:05 pm

 Thanks lads , Bought Simon Gerard's maxx tm and van. Everything on them is top spec. It came with a 4 jet wand , I'll be trying out this week.

Title: Re: 4 jet wand
Post by: Paul Moss on April 11, 2016, 08:54:22 pm

Make sure you check all the filters for hair  ;D as Simon wears a wig.

Title: Re: 4 jet wand
Post by: *Hector* on April 12, 2016, 08:58:56 am

But you can't see the join...  ;D ;D