Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: robbo333 on February 27, 2016, 06:14:20 pm
-
Today i've had some quality 'Me' time and I have...
1. Fitted 50 metres of new Gardiners Reinforced Pole Hose to my reel (added onto 50m of minibore).
2. Fitted a new Univalve to my Xtreme 25 (got rid of the aquatap)
3. Fitted some Lumark fan jets to my Supreme brush.
4. Fitted some Gardiners fan jets to my new Extreme stiff brush (kept the pencils too so I can switch).
5. Got a new Harris Pole and 2 new Progutter tools.
6. General tidy and clear out of van.
Can't wait till Monday to try it all out. ;D
-
Gardiner jets v Lumark?
Any differences?
I have the Gardiner ones but don't find it much of a wide spray as I was hoping.
Have an analogue controller has to be set to about 8 (out of 10) to get a decentish spray.
-
I've only had a play today but there is a noticeable difference in the quality of the lumark jets; much better in my opinion.
Be prepared to drill 12mm holes in your brush and glue them in. Also the barbs on the jets run off normal pole hose so you'll need a john guest fitting - 3 way - all 8mm holes. Hope that makes sense.
-
Today i've had some quality 'Me' time and I have...
1. Fitted 50 metres of new Gardiners Reinforced Pole Hose to my reel (added onto 50m of minibore).
2. Fitted a new Univalve to my Xtreme 25 (got rid of the aquatap)
3. Fitted some Lumark fan jets to my Supreme brush.
4. Fitted some Gardiners fan jets to my new Extreme stiff brush (kept the pencils too so I can switch).
5. Got a new Harris Pole and 2 new Progutter tools.
6. General tidy and clear out of van.
Can't wait till Monday to try it all out. ;D
Nice one ;)
-
Where did you buy the lumark jets from?
-
I think it was window cleaning warehouse. All in about 20 quid.
-
Also I got my Univalve from Sureclean Systems. Very quick delivery in case anyone still wants one.