Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Scott Blaney on February 09, 2016, 07:32:35 pm

Title: Steempro Vac Replacement
Post by: Scott Blaney on February 09, 2016, 07:32:35 pm
(http://www.cleanitup.co.uk/smf/1455046261_rps20160209_192108.jpg)

Hi,

In the attached photo, which vac is no.1 and which 2?   I assume 1 is top one next to the pump, 2 at the bottom near waste.

Title: Re: Steempro Vac Replacement
Post by: Carpet2Clean on February 09, 2016, 08:24:39 pm
Hi Scott

Yes your right.  What vacs are you going for ?

My old powermax is running 1500 watt 5.7's lambs

Richard
Title: Re: Steempro Vac Replacement
Post by: Scott Blaney on February 10, 2016, 11:11:22 pm
Well, it would appear the replacement is a lamb faker.  Suction is pretty dire compared to the original vac 1.

Fail
Title: Re: Steempro Vac Replacement
Post by: John Kelly on February 11, 2016, 01:18:54 pm
Plenty of them about. You need to be really careful buying these things as there is a lot of crap on the market including Chinese fakes.
Title: Re: Steempro Vac Replacement
Post by: Scott Blaney on February 16, 2016, 04:22:55 pm
Where's best for getting a genuine one?  AND not get my pants pulled down  :o

Usual ebay nonsense, seller claims these are real and must be installed wrong (load of nonsense)
Title: Re: Steempro Vac Replacement
Post by: Your Cleaning Matters on February 16, 2016, 06:42:15 pm
Just ordered two genuine 1200w Lamb Ametek 3 Stage, exact fit @ £89.99 each delivered, cheapest I could find

Link below

http://www.amazon.co.uk/gp/aw/d/B00XHTESUY/ref=mp_s_a_1_21?qid=1455647329&sr=8-21&pi=SY200_QL40&keywords=lamb+ametek
Title: Re: Steempro Vac Replacement
Post by: Scott Blaney on February 16, 2016, 11:14:13 pm
1200w?

Thought the real / originals were around 1500?
Title: Re: Steempro Vac Replacement
Post by: Carpet2Clean on February 16, 2016, 11:37:00 pm
Quote from: Scott Blaney on February 16, 2016, 11:14:13 pm
1200w?

Thought the real / originals were around 1500?

My ones were 1200 watts which i think was the norm for Prochem, as i added b4 its now running lamb 1500w   Had it done at Alltec

Richard