Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: William Sharpe on January 02, 2016, 06:42:55 pm

Title: Ninja Vaccum Motor blowing fuses
Post by: William Sharpe on January 02, 2016, 06:42:55 pm

Hi guys. I have 3 ninjas, I have changed vac motors and pumps as when required many times , however one off my ninjas consistantly blows the 10amp fuse situated on the plate  bracket on the 1st vac, my other two ninjas do not have these fuses. This ninja came with the 2 x 10amp fuses one for each vac.  Does anyone else who own ninjas or simular machine have these internal fuses for the vac motors.
As always your views will be appreciated
Reg

Title: Re: Ninja Vaccum Motor blowing fuses
Post by: Robin Ray on January 02, 2016, 07:37:31 pm

Does the fuse sit snugly in to its connector? If not it may be arcing sightly and getting hot causing it to blow....... possibly.... maybe