Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Ken Leeder on December 04, 2015, 05:51:24 pm

Title: Enforcer Vac Problem
Post by: Ken Leeder on December 04, 2015, 05:51:24 pm

I have 400 psi Enforcer. Today Turned on vac 2 no problem, turned on vac 1 and lost all suction and vacuum sound higher revs.  Turned all off and vac 2 working fine but turn on vac one and suction lost again. Later in day first attempt with vac 2 is no suction but second attempt ok. Lost for an answer and Ashbys closed. Any thoughts?

Title: Re: Enforcer Vac Problem
Post by: Adrian Walton on December 04, 2015, 05:58:44 pm

Have a look at the vac motors sometimes the foam gasket sucks in and then you will lose suction, you need to loosen the motor and reseat the gasket or replace it.