Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: MNWC on November 10, 2015, 01:34:35 pm

Title: Pressure gauge for 4040 ?
Post by: MNWC on November 10, 2015, 01:34:35 pm

Im looking for a pressure gauge for a 4040 housing on that screws into the housing one side and with a 12mm barb on the other.

Any ideas ?

Thanks

Title: Re: Pressure gauge for 4040 ?
Post by: martinw on November 11, 2015, 01:49:50 pm

it does not exist unless you get a bunch of adapters and connectors.
easiest way is to get 1/2"bsp  jg connector to 1/2 pipe, and jg straight/barb plus reducer from 3/4 to 1/2 (alternatively 3/4 union plus 3/4 jg tap to 1/2push fit - last link)
http://gardinerpolesystems.co.uk/all-products/pure-water-systems/water-treatment/commercial-ro-complete-systems/1-2-push-fit-pressure-gauge.html
http://gardinerpolesystems.co.uk/a-john-guest-stem-to-a-barb.html
http://gardinerpolesystems.co.uk/john-guest-1-2-push-in-fitting-to-1-2-male-screw-bspt-thread.html
http://gardinerpolesystems.co.uk/john-guest-outside-tap-a-to-a-push-fit-adapter-729.html

Title: Re: Pressure gauge for 4040 ?
Post by: MNWC on November 11, 2015, 05:03:58 pm

Thanks for that martinw  :D

This is the thing im looking for
http://www.purefreedom.co.uk/water-purification/reverse-osmosis/2400-gpd-high-volume-reverse-osmosis-system-40-membrane-40-hf5-1018.html (http://www.purefreedom.co.uk/water-purification/reverse-osmosis/2400-gpd-high-volume-reverse-osmosis-system-40-membrane-40-hf5-1018.html)

Title: Re: Pressure gauge for 4040 ?
Post by: Spruce on November 11, 2015, 05:58:25 pm

http://www.ebay.co.uk/itm/Brass-3-way-T-Piece-Connector-1-2-BSPT-Male-to-2-x-1-2-BSPP-Female-Nick-1b86-/311412847777?hash=item4881a6f4a1:g:fLkAAOSwT6pVuNJM

You might need a reducer (male outside female inside) depending on the rear mounted thread of the pressure gauge.

Title: Re: Pressure gauge for 4040 ?
Post by: MNWC on November 12, 2015, 04:58:52 pm

Thanks guys
All ordered