Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: edward1 on November 01, 2015, 08:59:22 pm
-
hi ,
I wondered if any of u guys use the ionics hot systems ,thinking of getting one ,
I have heard that when the hot water is on there is a big drop in the flow and is even intermittent.but I haven't used or seen one in use so don't know.
let me know what u think .
thx
-
Who toldyou that then it's note effected at all and save your money get a couple of grand system and buy an add on diesel heater,save yourself about 6-7 grand
-
Who toldyou that then it's note effected at all and save your money get a couple of grand system and buy an add on diesel heater,save yourself about 6-7 grand
An add on diesel heater will cost you over 3 grand
-
that's what I thought about 3k for an add on .
does any one use the ionic heated system?
thx
-
Yeah I've got one,3k for the heater and well under 2k for the rest of the stuff saving you at least 5-6 k.Thermopure systems are well over 10k
-
The heater that you'll buy ie diesel add on will be the same system they are webasto heat exchanger systems
-
I have a zero with heater fitted, the problem is have is you can't control the heat and it comes out bloody hot the hoses start expanding then connectors pop off , I only use when very cold.
-
I have a zero with heater fitted, the problem is have is you can't control the heat and it comes out bloody hot the hoses start expanding then connectors pop off , I only use when very cold.
if its very hot and your working in very cold conditions you ll be cracking glass resulting in even more expense plus the time wasted faffing about fixing blown connectors not to mention the cost of diesel to heat the actual water up.i cant believe the cost of the ionics systems and you cant control the temperature of the water? ::)roll
-
Never crack a pane of glass with it since I've had my diesel heater,you only have to be careful with very thin glass PVC and the like don't even creek in the cold it's the glass without any room for expansion you have to watch
-
Hi there I'm selling a streamline heatwave.. only been used a few times, it's in really good condition. It's all fitted so you can come see it working for yourself, thanks Craig
craiglittler@live.co.uk or 07544545658
-
How much
-
how come ur selling it craig litter ?
-
A solution to popping connectors with hot water. First off use rectus 26 fittings on everything then run your pump on a bypass system rather than a flow controller. As your water heats up it expands with a normal pump/flow control combination when the flow is stopped that last bit of cold water that Enters the system has no where to go when it expands so pressure builds up beyond what you would normally run. With a bypass system the pressure is released regardless if there is flow or not!
Bypass before the heater though not after!