Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Paul Wisdom on October 20, 2015, 08:21:27 pm

Title: DRY FUSION ROTARY
Post by: Paul Wisdom on October 20, 2015, 08:21:27 pm

I have a dry fusion machine that I rarely use now and was wondering if I could get a brush attachment for agitation when using my HWE machine. Will most brushes fit this machine, or do I need a special brush attachment.

Title: Re: DRY FUSION ROTARY
Post by: Raymondo on October 20, 2015, 09:23:42 pm

Only the dry fusion brush will fit the machine (they are not cheap).

Why don't you just use the drive plate and a dry fusion pad for agitation.

Title: Re: DRY FUSION ROTARY
Post by: Paul Wisdom on October 20, 2015, 09:43:18 pm

Thanks for the info.
That's what I have been doing - but not that impressed. Just thought a brush would be a lot better.

Title: Re: DRY FUSION ROTARY
Post by: stuart_clark on October 20, 2015, 09:50:57 pm

Dry-Fusion machines are made by Columbus and a brush can be obtained from them, I purchased one from them quite a few years ago at a  fraction of the DF price



Stuart

Title: Re: DRY FUSION ROTARY
Post by: Raymondo on October 20, 2015, 09:53:43 pm

You are in Staffordshire according to your profile we are in Shropshire just over the border if you want to try the brush we have let us know.

 Its better to see if its does what you want than buy one and then find it no good to you.

Title: Re: DRY FUSION ROTARY
Post by: john martin on October 20, 2015, 09:55:02 pm

 Red floor pad would more effective than the bonnet  , depending on what your agitating

Title: Re: DRY FUSION ROTARY
Post by: Paul Wisdom on October 21, 2015, 07:40:33 am

Thanks Guys - do you have a link to that Columbus brush please.

Title: Re: DRY FUSION ROTARY
Post by: Paul Wisdom on October 21, 2015, 07:41:41 am

Quote from: Raymondo on October 20, 2015, 09:53:43 pm

You are in Staffordshire according to your profile we are in Shropshire just over the border if you want to try the brush we have let us know.

 Its better to see if its does what you want than buy one and then find it no good to you.

I am nr Lichfield. Where abouts are you in Shropshire? Thx

Title: Re: DRY FUSION ROTARY
Post by: Raymondo on October 21, 2015, 08:24:17 am

We are in Shrewsbury.

Title: Re: DRY FUSION ROTARY
Post by: Deep Cleaning Solutions on October 21, 2015, 08:58:00 am

If you are talking about commercial work then a red pad works far better than a brush attachment anyway. That's what we find and we scrub with red pads now on commercial work. I have never used dry fusion so don't know if a red pad will work on your drive plate but don't see why not if it holds pads.

Title: Re: DRY FUSION ROTARY
Post by: creighton foyle on October 21, 2015, 09:10:17 am

I bought my brush from kevin martin, he can supply a centre piece for most machines which you can then fit multiple brushes to its cheaper than the df brush and good quality but you will have to remember to turn your heater off on the machine.

Title: Re: DRY FUSION ROTARY
Post by: Kev Martin on October 21, 2015, 09:24:17 am

We sell brushes and driveboards to fit any machine through our German Brush system.  All you need do is buy a centre clutch from us to fit your machine then any driveboard or brush is available from us to fit.  Have a look at the links below

http://www.tilinglogistics.co.uk/Brush-Easy-Change-Central-Lock-Adapter-Only?filter_name=brush
http://www.tilinglogistics.co.uk/Rotary-Floor-Machine-Universal-Medium-Hard-Brush-Easy-Change-System?filter_name=brush

Title: Re: DRY FUSION ROTARY
Post by: Paul Wisdom on October 21, 2015, 10:09:22 am

Thanks for all the info - appreciated  ;D