Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: rick trinder on September 23, 2015, 10:18:21 pm
-
hi guys, hope you can help.... i had to take my pump out today. and now its pumping but i have no water at the brush!!!! have i?/can you? wire it up the wrong way? so that it would just suck air into the water tank??? thanks for any help. i am getting rather flustered!!!!
-
Sounds like an airlock possibly, Iv had a few in the past, I usually leave the pump running and disconnect/ connect the hose a few times , eventually, the airlock goes
-
i had it running for 15 mins!!!! undid the d.i and a small hiss of air came out but that was it!!!!!
-
Maybe not wired the wrong way but did you put the hoses back the right way ?
Most likely airlock - with the hoses connected unscrew the pump from where it's mounted and turn it on then jiggle it about a bit - it will help if you can then unplug the outlet side hose
Darran
-
smudger! you the man...... all working now thanks buddy.
-
👍
-
Glad I could help mate, thought it was an airlock 👍
-
Glad I could help mate, thought it was an airlock 👍
;D ;D
-
I like to feel appreciated ;D ;D