Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: andy east sussex on September 11, 2015, 01:32:12 pm
-
I want to upgrade my ninja to bigger pump think its only the 135 pump I would like more pressure so question is has anyone upgraded bought and installed the parts by your self ?
-
You will be limited as there isn't a lot of room inside a ninga but a 200 psi pumptec may go in
-
A 400 psi pump will go in as it is also made with one. It needs to be mounted on an L shaped piece of metal so it can stand upright with the pump head down. It will also need a pressure gauge and a regulator which can handle the extra pressure.
Personally I wouldn't bother.
-
There is this ...
http://www.carpetcleanersstore.co.uk/product/aquatecpump220
-
I think that pump has no bypass and works on a pressure switch. Therefore it will have to be plumbed in with no pressure control. I may be wrong but it may be worth checking this out first.
-
you could sell your ninja then buy a second hand ninja with 400psi and flow control and pressure gauge,i actually have one for sale
-
I think that pump has no bypass and works on a pressure switch. Therefore it will have to be plumbed in with no pressure control. I may be wrong but it may be worth checking this out first.
Yeah , internal bypass , but i'd say u could use with pressure control . If someone is using a very basic ' stair tool ' for upholstery they may have to adjust pressure down , but many of the dedicated upholstery tools would be fine at whatever max pressure it produces , im sure its not some high flow monster pump but just a bit better than a 130psi if hes not happy with that .
I'v posted that link several times , wonder did anyone try them , could be a handy solution for many .
This is the non switch version tested
https://www.youtube.com/watch?v=UTXaNEvgfRU
-
how much are you looking for your ninja