Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Paul erithwc on July 03, 2015, 05:50:10 pm

Title: Fitting micro bore to a claber hose reel from gardiner
Post by: Paul erithwc on July 03, 2015, 05:50:10 pm

What the best leak free way to fit micro bore the the claber hose lock connection inside the reel  ???

Thanks Paul

Title: Re: Fitting micro bore to a claber hose reel from gardiner
Post by: dazmond on July 03, 2015, 06:38:17 pm

the orange plastic  hoselock that gardiners sell specifically for microbore hose.you also want a brass swivel elbow for the outside of the reel.they usually give you an option to buy a connection kit with the claber reel if you ordered from gardiners.

hope that helps mate. ;)

Title: Re: Fitting micro bore to a claber hose reel from gardiner
Post by: Marko on July 03, 2015, 06:59:20 pm

Yeah Dazmonds right - just look at the fitting kit that Gardiners sell separately on the website  :)

Title: Re: Fitting micro bore to a claber hose reel from gardiner
Post by: Paul erithwc on July 03, 2015, 07:08:41 pm

Already had spare elbow and connectors in the van i didn't realise the one on gardiners site was for microbore  :'(

Title: Re: Fitting micro bore to a claber hose reel from gardiner
Post by: slap bash on July 04, 2015, 10:34:59 am

I found the gardeners female/ micro bore fitting leaks or even come loose with the water pressure so just heated the micro hose and  pushed it over the male part on reel then used a clamp to hold it.