Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: wpclean on June 02, 2015, 11:59:15 pm

Title: Running a twin feed direct from tank ?
Post by: wpclean on June 02, 2015, 11:59:15 pm

After reading the posts about the twin feed Honda 21lpm, got me thinking I want to put a fitting directly on my water tank to feed the pressure washer.    Instead of cutting two holes in tank for each of the pipes, could I just use one larger fitting, and connect the two pipes to that, and if so what fitting would you recommend ?       
I normally use the pw as a static system, but I will always like the option of being able to take the washer out.

Thanks for any advice, I love you guys  ;D

Title: Re: Running a twin feed direct from tank ?
Post by: Jettaway on June 03, 2015, 06:25:54 am

Just drill 2 holes. Be a lot simpler. Don't over complicate it mate

Title: Re: Running a twin feed direct from tank ?
Post by: Smudger on June 03, 2015, 07:47:27 am

I used 2 cam locks at the bottom of the tank - easy to connect and can blank them off if required
Getting a large hole in the tank  to feed and use a  tee piece  to split the flow is a little complicated for a mobile tank

Darran

Title: Re: Running a twin feed direct from tank ?
Post by: wpclean on June 03, 2015, 09:05:57 am

Quote from: Smudger on June 03, 2015, 07:47:27 am

I used 2 cam locks at the bottom of the tank - easy to connect and can blank them off if required
Getting a large hole in the tank  to feed and use a  tee piece  to split the flow is a little complicated for a mobile tank

Darran

Thanks for that, where can I find these please ?

Title: Re: Running a twin feed direct from tank ?
Post by: Smudger on June 03, 2015, 09:08:04 am

http://www.ebay.co.uk/itm/CAMLOCK-COUPLING-FEMALE-MALE-HOSE-TAIL-TYPE-A-B-C-D-E-F-CAM-GROOVE-/111012522387?pt=LH_DefaultDomain_3&var=&hash=item19d8dca993

Darran

Title: Re: Running a twin feed direct from tank ?
Post by: wpclean on June 03, 2015, 07:35:31 pm

Thanks mate  ;D