Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: H MAN on May 17, 2015, 08:12:08 am

Title: HAMMERED SQUEEGEE CHANNEL!!??
Post by: H MAN on May 17, 2015, 08:12:08 am

All we did was hammered the channels into shape.
See the easy fix result.
That easy the manufacturers should be able to do that??
Just needs around 3mm higher up at each end.
Then it is close to the edge of the squeegee rubber at the ends when being used.
https://www.youtube.com/watch?v=A_XGwx5AxTA
(https://scontent-lax.xx.fbcdn.net/hphotos-xtp1/t31.0-8/11266619_10206910742915500_3376186823520838809_o.jpg)

Title: Re: HAMMERED SQUEEGEE CHANNEL!!??
Post by: slap bash on May 17, 2015, 10:25:37 am

Hi Herman the problem I have with dog ear -ing is each one of your  channels are altered differently. Try explaining which the principal of dog ear ing. I don`t seam to see any pattern in what you are doing.

Title: Re: HAMMERED SQUEEGEE CHANNEL!!??
Post by: H MAN on May 17, 2015, 10:35:19 am

Quote from: slap bash on May 17, 2015, 10:25:37 am

Hi Herman the problem I have with dog ear -ing is each one of your  channels are altered differently. Try explaining which the principal of dog ear ing. I don`t seam to see any pattern in what you are doing.

What's altered  differently???

Title: Re: HAMMERED SQUEEGEE CHANNEL!!??
Post by: H MAN on May 17, 2015, 11:33:12 am

Hope this shows what I mean?
(https://scontent-lax.xx.fbcdn.net/hphotos-xpt1/t31.0-8/11270386_10206911358410887_4055298145567977733_o.jpg)
(https://scontent-lax.xx.fbcdn.net/hphotos-xat1/t31.0-8/11114781_10206911360170931_5360899610251819406_o.jpg)