Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: H MAN on May 10, 2015, 10:21:00 am
-
Here you will see it is not necessary to dog-ear your squeegee channels inwards but just up!!
This can be done with any standard squeegee channel.
This will explain why.
https://www.youtube.com/watch?v=SIMkQXC9Nqo
-
Top man
-
Top man
In the video you will notice when flexing the squeegee rubber back .
Goes back on the squeegee channel.
However cutting and splaying the channel up closer to the edge of the squeegee rubber.
That that part now does not flex that far back.
There is no need to press hard on the squeegee.
-
I do enjoy your post's H ;D
-
Here you will see it is not necessary to dog-ear your squeegee channels inwards but just up!!
This can be done with any standard squeegee channel.
This will explain why.
https://www.youtube.com/watch?v=SIMkQXC9Nqo
H tell me you never rubbed your squeegee rubber along them bricks at the end to get the soap off?
-
H tell me you never rubbed your squeegee rubber along them bricks at the end to get the soap off?
[/quote]
:o Thought I did ::)roll
You mean the tiles set at the bottom of window??
Although most of time I don't in the videos.
It was just to show how we used the squeegee.
-
I like that but he does at the end of his videos,that's aboooouuuut it lol
-
OK now also have done this to Liquidator Steccone and Wagtail channels.
Wide body channels like Sorbo in the video above.
Plus here is once you have done this to your channel;
There is no need to adjust anything will not fall off it’s not an attachment.
No need to change the way you use the squeegee.
They all work as good if no better then other ideas out there.