Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: homenclean on May 04, 2015, 08:50:23 pm

Title: Bargain or Not
Post by: homenclean on May 04, 2015, 08:50:23 pm

Bought a Kleenrite edge machine 300psi machine the other week recently had a new pump head and both vacs and pump work well also has in line heater built in.

Down sides
leak on the pressure regulator and leek on dirty water tank from where the float valve is fitted to the case also needs new pressure gage and would benefit from a couple of new wheels.

only paid £300 for it, bought  it with commercial jobs in mind as we do a lot of restaurants and pubs, so thought it would be
perfect and allow me to keep the Ninja decent for domestic jobs etc. Plus a good back up machine.

john

Title: Re: Bargain or Not
Post by: stuart_clark on May 04, 2015, 11:14:40 pm

Pressure regulator seal is a bullet with an o ring , the o ring splits then leaks air and water, they cost about a tenner nick white sells them

Title: Re: Bargain or Not
Post by: Jamie Pearson on May 06, 2015, 12:22:00 pm

Good machine.

Crisp & Brite do the spares from them.

The heaters can go on them but its all easily fixed apart from the regulator which needs a good strip down of the machine to access.

ChemDry used a similar version of the machine for a while which the called the PowerBase. It was also sold as the Chemspec Hydrovantage .

Title: Re: Bargain or Not
Post by: Adrian Ridley on May 08, 2015, 11:11:30 am

Hi mate, hope all is well . If your doing 4/5 jobs a day or don't see what your problem is as you must already have enough work.