Clean It Up
		UK General Cleaning Forum => General Cleaning Forum => Topic started by: Richy L on April 07, 2015, 08:14:59 pm
		
			
			- 
				I've been looking at getting a big 30lpm hotbox for my 21lpm pressure washer, but have been told I need a 2.5kva genny.
 
 I know some guys on here use small generators for their hot boxes. I dont really want to keep my 5.5kva in the van at all times as it takes up too  much room(and weight).
 
 What generator would this need?...
 http://www.ebay.co.uk/itm/HYPER-CLEAN-SYSTEM-HOT-BOX-SKID-FRAME-STANDING-CHASSIS-/131025233420?pt=LH_DefaultDomain_3&hash=item1e81b6660c
- 
				Is your washer key start?  If so just run an invertor off the washer starter battery.  
 A 1kva generator is more than enough for a hot box. You are only running a fan ,and ignition pack.
- 
				No, its a pull start.
 So a 1kva is fine for a 21ltr hot box.
 The 30lpm hotbox has a bigger fan I have been told so it needs a bigger KVA.
 
 May be worth just going for the 21ltr hot box then.
- 
				Can't see it having a 2000 watt fan….
			
- 
				Damien from Qwashers told me I needed a bigger generator for the larger burner due to the bigger fan.
			
- 
				Hello Richy 
 I have seen this on eBay and it looks like a nice piece of kit to add on, other than getting chewing gum up what other benefits are there to being hot as opposed to cold.
 
 Matt
- 
				http://www.malcleanse.co.uk/240-volt-burner-motor-e25422-p-4973.html    
 150 watts for 21lpm boiler…..cant see a 30lpm boiler needing fan that is 6x bigger = 900watts… thats not even 1kva .
- 
				I have a generator built into my machine, runs off a belt, same as the pump. It powers my boilet, the generator os only tiny and works out 110v. Chris is right, even a big hot box wont need a massive genny..
			
- 
				What PW do you have Matt?
			
- 
				Bought it off Rutland pumps, 21 lpm or 20 lpm not 100%, 220 bar. Tbh mate it's quite decent, I have done a few jobs with it, and am happy with what it does. I have just ordered some extra hoses, bought 50m with machine and ordered another 80m yesterday for a roof I need to clean. 
 Am just learning with it to start with so don't no much about machines
 
 Matt
- 
				Just read previous posts and I think you was talking to other Matt 
 
 Haha - no problem
- 
				Ive got a Lombardini machine. Its a belt drive pump. its well set up but i dont see why you couldnt investigate the option of adding a small genny to run off your machine. 
			
- 
				I run a Honda gx390 21 lpm now. I sold my yanmar a while back. Does anyone know if it possible?
			
- 
				http://www.malcleanse.co.uk/mazzoni-12v-boiler-350-bar-30-lpm-boiler12v30-p-7305.html
 http://www.ebay.co.uk/itm/FIT-Honda-GX390-13-hp-ELECTRIC-START-KIT-SHROUD-STARTER-MOTOR-KEY-BOX-FLYWHEEL-/220997847097
- 
				I'm sorry about my ignorance in this, but if I use this...  http://www.ebay.co.uk/itm/FIT-Honda-GX390-13-hp-ELECTRIC-START-KIT-SHROUD-STARTER-MOTOR-KEY-BOX-FLYWHEEL-/220997847097 ... what else do I need to buy?
 Pressure washer(i own)
 Burner (to buy)
 The link above(to buy)
 ... anything else? battery? gennie?
 
- 
				Battery to start the p/w. Depending on what route you take…either an invertor to up the 12v dc battery output to 240 ac or a 12v burner as above.