Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: bobplum on March 11, 2015, 08:44:26 pm
-
did i hear or read correctly that the exceed innovation system can be fitted to any pole???......in particular a gardiners extreme..??
Many thanks
Bob
-
YES THEY DO MAKE A KIT. But you can make your own by fitting the John Guest so that it come out of the bottom of the pole when closed. And if you are up for a little more effort you can drill a wine bottle cork and feeding the hose throughand inserting it at the bottom of the 1 st section and silicone the John Guest fitting so half protrudes out of the lower 1st section and therefore will protrude out of the pole when closed allowing you to remove the pole at will.
-
cheers
-
Are you fitting a kit or making your own ?
I have a photograph guide to making your own if you want it Bob.
-
initially looking to get the kit from exceed but have had no response from email inquiry, if you could send over the video much appreciated
bob
-
Ok will send it over. It's a photo guide. Not a video ;)
-
Could I also have the photos No 23
Send to boet1950@g mail.com
-
here is my email: wcsproclean@gmail.com
Cheers Bob
-
Me too please
tony@tlwcs.co.uk
-
Could I also have the photos No 23
Send to boet1950@g mail.com
What no please? Sent.
-
Me too please
tony@tlwcs.co.uk
That's better ;) Sent :)
-
here is my email: wcsproclean@gmail.com
Cheers Bob
Pro? :P :P Sent
-
just seen them, thanks very much, going to try it over the weekend, will let you know how i get on
Bob
-
dare I ask would you please be so kind to send me info ive just bought 2 new slx I want to keep em as long as poss.thanks.email id .davidfox1961@yahoo.co.uk
-
Could i Please Please Pretty Please also have have a copy info@mmwindowcleaning.co.uk
-
Done & done :)
-
Done & done :)
Dont think i have configured my new domain email correctly :'( :'( Please can you send to mmsales@sky.com ;)
-
Could you send it to me as well at hickeys45@yahoo.ie please, please, please, please please, please, please
-
look back through my posts guys, i posted the guide up from what someone sent me, ive not had time to do it myself yet but ive had the sleeve fitted inside the pole for a while, i just need to securely fit the male rectus inside as i dont want mine hanging out the end!
-
Its really easy.
Done this 8 months ago to my smax 40.
I just held the male rectus fitting flush in the end of the first pole section with a bit of polymorh ( google it, its a re-usable modelling plastic that you melt in hot water, available now in maplins as well as ebay etc. ) although I like the cork idea too.
If I can be bothered I may post some pics after Monday when this site enters the 21st century ;)
One pole, covers everything, breaks down from a 40 to a 25 to a single section for gf.
-
hi 23.....it would be awfully kind of you ol chap if you could forward to me also pleeeese ;)
tonycarrington62@yahoo.com
tony
p/s you changed your avatar & name were you h20?
-
http://www.cleanitup.co.uk/smf/index.php?topic=193045.msg1673312#msg1673312
-
We do this way it same thing ??
WFP NO MORE LONG POLE HOSES EASY FIX
https://www.youtube.com/watch?v=p66K7Ilfj8w
-
well after reading this post this morning i decided to make an effort to finish this and basically i put a piece of gardiner minibore reel hose sleeved over the thin pole hose and jammed it in the end of the plastic pushfit insert,fits really snug, i didnt have a reel to pole hose barbed joiner so for now ive sleeved it again and jubilee clipped it and itdoesnt slow the flow etc then covered it in thick black tape, tried it all and works a treat every time!
only issue i will have is i need some sort of sleeve for the rectus female end as that will be dragging across the floor and wont last long!
(http://i305.photobucket.com/albums/nn222/glenandem/hoseless%20pole%20diy/674419BE-2036-4DD5-A8A1-8022106BF21B_zpsvfztharf.jpg) (http://s305.photobucket.com/user/glenandem/media/hoseless%20pole%20diy/674419BE-2036-4DD5-A8A1-8022106BF21B_zpsvfztharf.jpg.html)
(http://i305.photobucket.com/albums/nn222/glenandem/hoseless%20pole%20diy/E3BF3783-4462-49CE-9F43-28C5534294E1_zpsxjrqnpfd.jpg) (http://s305.photobucket.com/user/glenandem/media/hoseless%20pole%20diy/E3BF3783-4462-49CE-9F43-28C5534294E1_zpsxjrqnpfd.jpg.html)
-
only issue i will have is i need some sort of sleeve for the rectus female end as that will be dragging across the floor and wont last long!
polymorph !
https://www.youtube.com/watch?v=IhVuc6RNyaw
http://www.ebay.co.uk/itm/100g-Polymorph-Thermoplastic-DIY-/271802445773?pt=LH_DefaultDomain_3&hash=item3f48b02fcd
-
hi 23.....it would be awfully kind of you ol chap if you could forward to me also pleeeese ;)
tonycarrington62@yahoo.com
tony
p/s you changed your avatar & name were you h20?
The link is in this thread to the guide. So easier to check that.
Yes I was. That company doesn't exsist anymore. Hence name change.
-
Cheers me bitt but would that mouldable stuff work with a rectus and the sliding sleeve?
-
Cheers me bitt but would that mouldable stuff work with a rectus and the sliding sleeve?
I've used it on the sliding sleeve of a gardiners pro hoselock female connection before and it worked, although that's a bit bigger, no reason why not. may be a bit fiddly but the good thing is you can melt it down and re-use again and again, trial and error. Nothing to lose really in trying, this stuff should be in everyone's toolbox, its so useful. ;)
-
cheers fella, think i'll try and mould some see how it goes!