Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: john63. on February 03, 2015, 07:18:55 pm
-
What's the best number to control the flow between 1 and 9 using too much water been having it about 5
-
Use a lower number? ???
-
What's the best number to control the flow between 1 and 9 using too much water been having it about 5
You can't knock Dons answer.
I like to work with a flow of 5 but do waste water on the scrubbing phase. I found it worse at the moment because the windows are so dirty added to which I'm well behind with my cleaning schedule. I would love to have 3 for scrubbing and 5 for rinsing.
I've also found that we probably aren't using as much water as we normally would as the flow with colder water is less than when the water is warmer in summer.
-
can you define using too much water??
-
Oh bob...bob, bob, bob....
I've heard some dipsticky questions but mate...
I think by 'too much water' he means he's using more than he needs...
We need to get you another icecream and quick...
(I'll give you a bell later in the week if youmre free, see how you're getting on!!)
-
Use a lower number? ???
And don't spend so much time scrubbing. With a regular clean, just once over, rinse, move on.
Job jobbed.
-
Use a tap and turn it down a bit if you want less flow
-
Spruce, get an aqua tap, for scrubbing you can twist it anywhere from zero to full - I usually have around half open for scrubbing then twist to get full flow
Darran
-
Spruce, get an aqua tap, for scrubbing you can twist it anywhere from zero to full - I usually have around half open for scrubbing then twist to get full flow
Darran
I am tempted. Still have a new Aquadapter 'waiting in the wings' - the old ones just go on and on.