Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Lee Burbidge on January 24, 2015, 06:26:02 pm
-
I spent 3 days with Mr Bob Hatt AKA Polzn Bladz, the most nicest person you could ever meet..... and he knows his squeegees, please check his channel at https://www.youtube.com/user/bobhatt123/videos if you are not already aware of him :)
http://www.windowcleaningmagazine.co.uk/blog/moerman-enters-an-innovating-stage-polzn-and-bladz-chips-in/
-
I spent 3 days with Mr Bob Hatt AKA Polzn Bladz, the most nicest person you could ever meet..... and he knows his squeegees, please check his channel at https://www.youtube.com/user/bobhatt123/videos if you are not already aware of him :)
http://www.windowcleaningmagazine.co.uk/blog/moerman-enters-an-innovating-stage-polzn-and-bladz-chips-in/
Take my hat off to Polzn Bladz, Chris Dawbar, Mark Munro etc for taking the time to upload all there videos.
-
A window clean with out an attitude and he knows his stuff. Its nice to see there is still passion for trade as I still believe trad is a strong part of window cleaning.Nice one Lee. Very interesting Moerman etc.
-
I'll buy one of those squeegee's if it comes out .
-
It is coming out that's for sure
-
hope its better than there first attempt they were poo :o
-
I must be a bit dense.
What squeegee?
-
So do have to buy the whole squeegee ???
Or can you just get the end bits so to put on your own squeegee?? ::)roll
-
I must be a bit dense.
What squeegee?
I think it's the first pre bent dog eared squeegee to come onto the market.to be honest I don't know why they haven't been on the market before.saves a fair bit of detailing.
-
I must be a bit dense.
What squeegee?
I think it's the first pre bent dog eared squeegee to come onto the market.to be honest I don't know why they haven't been on the market before.saves a fair bit of detailing.
It is the first, there's a couple of other features as well, shouldn't be long befire its released
-
I think it's the first pre bent dog eared squeegee to come onto the market.to be honest I don't know why they haven't been on the market before.saves a fair bit of detailing.
Thanks for that Dazmond.
I clean a few hairdressing salons and if someone could invent a squeegee blade that doesn't get hair stuck to it, I'd buy the entire stock.
-
I think it's the first pre bent dog eared squeegee to come onto the market.to be honest I don't know why they haven't been on the market before.saves a fair bit of detailing.
Thanks for that Dazmond.
I clean a few hairdressing salons and if someone could invent a squeegee blade that doesn't get hair stuck to it, I'd buy the entire stock.
Haha. My partner owns a salon. I hate doing the insides. Tbh I usually just use a spray bottle and microfibres. Might take longer on the front windows but at least I don't have hair everywhere ;D
-
Don't the Unger clips do the same thing as a dog ear? I've got a little box of them in the Garage.
-
He released a video showing it in action a few days ago! It looks really good!
Unfortunately the video has now gone as I think he got told off by the manufacter for showing it to early!
-
Don't the Unger clips do the same thing as a dog ear? I've got a little box of them in the Garage.
I thought it was Ettore that had the clips? Maybe?
-
I think it's the first pre bent dog eared squeegee to come onto the market.to be honest I don't know why they haven't been on the market before.saves a fair bit of detailing.
Thanks for that Dazmond.
I clean a few hairdressing salons and if someone could invent a squeegee blade that doesn't get hair stuck to it, I'd buy the entire stock.
Bloody hairdressers!
I only do one. But I leave it so it's my last blade job of the day.
The applicator needs washing before I can use it anywhere else.
One of the chairs is literally 400mm from the window ::)roll
-
Don't the Unger clips do the same thing as a dog ear? I've got a little box of them in the Garage.
I thought it was Ettore that had the clips? Maybe?
Second one down http://www.cleaningspot.co.uk/acatalog/Channel_clips.html
-
Second one down http://www.cleaningspot.co.uk/acatalog/Channel_clips.html
I'd forgotten about those.
Oddly enough, I was thinking of the brass clips above which now I remember were Ettore and held the rubber in place. My mistake.
-
Bloody hairdressers!
I only do one. But I leave it so it's my last blade job of the day.
The applicator needs washing before I can use it anywhere else.
One of the chairs is literally 400mm from the window ::)roll
I have an applicator just for the hair salons other wise you end up with womens hair being a pain in the rear on every other job. It's sticks like velcro to the applicator and squeegee.
With the squeegee, the first pass is fine and then the second will leave a few fine lines and then it gets worse from there on. Maybe I should do what Number 23 does, cloth the glass.
-
Bloody hairdressers!
I only do one. But I leave it so it's my last blade job of the day.
The applicator needs washing before I can use it anywhere else.
One of the chairs is literally 400mm from the window ::)roll
I have an applicator just for the hair salons other wise you end up with womens hair being a pain in the rear on every other job. It's sticks like velcro to the applicator and squeegee.
With the squeegee, the first pass is fine and then the second will leave a few fine lines and then it gets worse from there on. Maybe I should do what Number 23 does, cloth the glass.
Clothing seems to be ok in summer but in winter, the glass gets really condensationy inside.
Wouldn't work for me.
-
All you really need on the ends of the squeegee to hold the rubber stiffer at the ends.
As explained in this video below.
Good thing is that you can do it on any squeegee channel.
https://www.youtube.com/watch?v=U-brM58Qxr8
-
Isn't it easier to just get a pair of pliers and bend the end of the channel?
You only have to do that once.
-
Isn't it easier to just get a pair of pliers and bend the end of the channel?
You only have to do that once.
Yes it would be easier to do that as well.
But is you have wide body channels like a sorbo would think it not that easy.
-
Don't the Unger clips do the same thing as a dog ear? I've got a little box of them in the Garage.
Yes....they work fine Mr Willis.
-
I must be a bit dense.
What squeegee?
I think it's the first pre bent dog eared squeegee to come onto the market.to be honest I don't know why they haven't been on the market before.saves a fair bit of detailing.
Urm...not quite dazmond......
My Unger Ultimate Carbon Squeegee (which I won for FREE ;) ;D) has a pre-bent dog-eared channel ;).
-
is there any pictures of this blade.?
-
is there any pictures of this blade.?
Not yet will be soon
-
is there any pictures of this blade.?
Not yet will be soon
ok cheers