Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: david@zap-clean on January 16, 2015, 12:57:29 pm

Title: T Jet pressure sprayer nozzle
Post by: david@zap-clean on January 16, 2015, 12:57:29 pm
I bought a brass T Jet pressure sprayer nozzle a while ago, for protector application - what a load of rubbish!
After just one use I cannot get the jet unblocked.  I've tried everything I can think of.

http://www.worldofclean.co.uk/carpet-cleaning-equipment/jets-for-wands-hand-tools-sprayers/t-jet-nozzle-50015.html

Don't bother buying one.
Title: Re: T Jet pressure sprayer nozzle
Post by: Mike Halliday on January 16, 2015, 01:01:55 pm
Why is that the jets problem? If it's blocking then you need an inline filter.

Plumber have a tool for For unblocking jets... lots of fine pieces of wire that you just poke through.
Title: Re: T Jet pressure sprayer nozzle
Post by: david@zap-clean on January 16, 2015, 01:21:27 pm
Quote from: Mike Halliday on January 16, 2015, 01:01:55 pm
Why is that the jets problem? If it's blocking then you need an inline filter.

Plumber have a tool for For unblocking jets... lots of fine pieces of wire that you just poke through.

I think it's the jet's problem.  I've only put liquid through it (not powdered stuff), it's made of brass, so I think it's furred up after one use!

I'll see if I can get hold of some suitable wire - Tnx for the tip.
Title: Re: T Jet pressure sprayer nozzle
Post by: stuart_clark on January 16, 2015, 01:37:39 pm
Soak it in acid rinse overnight, that normally does  the trick David
Title: Re: T Jet pressure sprayer nozzle
Post by: John Kelly on January 16, 2015, 02:01:37 pm
Protectors are a resin based chemical. Sprayers need to rinsed through with clean water after every use otherwise the resin will set within the triggers and jets.
Title: Re: T Jet pressure sprayer nozzle
Post by: david@zap-clean on January 16, 2015, 02:25:02 pm
Tnx everyone, great advice, as ever.