Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Scott92 on January 07, 2015, 04:55:48 pm

Title: Flo jet 100 psi pump issues
Post by: Scott92 on January 07, 2015, 04:55:48 pm

Hi guys,

Didn't work over Xmas and went to start work this week and the controller was flashing ps which I've since found out is the pressure switch. Everything seems to be in order no air locks etc..

Is it just a case of replacing the switch? It's only a year old pump

Thanks!

Title: Re: Flo jet 100 psi pump issues
Post by: Dave Willis on January 07, 2015, 05:02:56 pm

 try gently tapping the pressure switch.

Title: Re: Flo jet 100 psi pump issues
Post by: Ian Sheppard on January 07, 2015, 05:19:07 pm

HI the controller is showing the pump pressure switch has activated.
This may be due to a pressure build up in the system or a loose electrical connection. The Controller carries out a test to ensure the pump is in circuit. A faulty connector, damaged cable or even loose connection to the battery terminal or connector could be the cause of the issue.

This link may be of help also
http://www.springltd.co/node/48