Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: WGB on December 12, 2014, 10:44:44 pm

Title: aqua tap
Post by: WGB on December 12, 2014, 10:44:44 pm

When fitting the aqua tap onto an slx  is there a extra fitting you have to get for it to fit on to the resi neck? The reason I ask is when I used the aqua adapter earlier this year had to take the bottom half of the resi neck off and put aqua adapter fittings on losing the 60˚ angle the Slx gives you which I didn't like. Just wondering if aqua tap is the same?

Thanks Wayne

Title: Re: aqua tap
Post by: Spruce on December 12, 2014, 10:56:22 pm

Remove resinek.

Order this
http://www.gardinerpolesystems.co.uk/acatalog/Aluminium-Pole-End-Screw-Type3-Alloy_Pole_Adaptor.html

+ Aquadapter

+ angle adaptor
http://www.ebay.co.uk/itm/WATERFED-POLE-WINDOW-CLEANING-ANGLE-ADAPTOR-/120495033400?pt=UK_HomeGarden_CLV_Cleaning_CA&hash=item1c0e104c38

+
brush with either this brush socket
http://www.gardinerpolesystems.co.uk/acatalog/brush-socket-90-degrees-new-standard-socket.html

or

this socket
http://www.gardinerpolesystems.co.uk/acatalog/brush-socket-angled.html

will get your Aquadapter working on a CLX or SLX pole.

But sssssssssssh. Alex doesn't like Aquadapters.  :)

Title: Re: aqua tap
Post by: Smudger on December 13, 2014, 08:52:00 am

Lol

Make sure you do use the one spruce has linked to with regards to the end screw because it has a long shaft to support the weight of the aquadaptor I started out with a standard insert and after six weeks it ripped the clamp out.

I changed over to Peter fogwill aquatap's now, much lighter, much less to go wrong with them.

Darran

Title: Re: aqua tap
Post by: WGB on December 13, 2014, 10:10:37 am

I want to change to aqua tap too would I need same fittings for aqua tap?? Also the residents neck linked above has the screw on nut to adjust angle of brush where the slx has a handy little lever, can you put this on new resi neck?

Thanks Wayne