Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Steven Butler on December 08, 2014, 03:51:40 pm
-
Can anyone who uses this protector please email me as i have a few questions id really appreciate answering.
stevenbutler06@btinternet.com
Thanks
-
I used to use it 15 - 20 years ago..
Why not ask the question on here here so that lots of people can join in and give you some silly answers and some good ones to?
-
Just want to know what sprayer is ideal....
Ive been told by very experienced pros not to spray under furniture etc but others say do..???
How much to put down....
Any advise really. Cheers
-
I thought you where supposed to cover the whole room but at the moment I don't sell protector
-
You'd be better off with something like chemspec stain shield and it will work out a lot more cost effective too as you will need about 10 bottles of prochem to 1 of chemspec. I would always protect under the furniture its not hard to spray it before you put the furniture back in place,and if something gets spilt on an unprotected area you won't look very professional.
-
as you will need about 10 bottles of prochem to 1 of chemspec.
how is that?
-
I did do under furniture in the end. After thinking about it you cant not really.
Im going to try Chemspec stainshield and also protect nano because like you say flouroseal plus isnt very cost effective...although its good been able to use straight from the bottle.
-
Hi Steve I suggest you use Chemspec Concentrated Stainshield Protector you dilute 4 to 1 with water and you apply 5 litres to pre-mixed solution to 25metres of carpet.Use a fan type spray and make sure you overlap until all carpet is covered and yes apply under furniture and I would advise you use carpet protectors after so furniture doesn't leave either wood stain or rust from legs especially if they have metal studs under the legs on the carpet.
-
as you will need about 10 bottles of prochem to 1 of chemspec.
how is that?
I may of over exaggerated that but at least 5, if you dilute chemspec down to 8:1 for use on damp carpets you can get up to 250m2 from 1 bottle compared to 30-50m2 from prochem.
-
as you will need about 10 bottles of prochem to 1 of chemspec.
how is that?
I may of over exaggerated that but at least 5, if you dilute chemspec down to 8:1 for use on damp carpets you can get up to 250m2 from 1 bottle compared to 30-50m2 from prochem.
if they say 4 to 1 then must it be, so you get around 125 sq meters. Otherwise you cheat your customer.
-
as you will need about 10 bottles of prochem to 1 of chemspec.
how is that?
I may of over exaggerated that but at least 5, if you dilute chemspec down to 8:1 for use on damp carpets you can get up to 250m2 from 1 bottle compared to 30-50m2 from prochem.
if they say 4 to 1 then must it be, so you get around 125 sq meters. Otherwise you cheat your customer.
If you read the label it says 4:1 for dry carpet and 8:1 for wet carpet and if you've just cleaned it i'm guessing it will be wet but i may be wrong.
-
Ive got that wrong its the other way round its 8;1 for dry carpet (its been a long week)