Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Darran Pryce on November 22, 2014, 02:47:54 pm
-
Guys, for those of you who use formula 90 as a pre spray, what's your dilution rate to per 1ltr of water (1 scoop per 1ltre?
Cheers
Darran
-
I don't think I have a formula it's dependant on soiling I am still playing with it even years after using it but I'd go with 1 scoop per 2 litres in warm water.
Shaun
-
If you are going to use it as prespray then I would just use what dilution you have I the tank , spray it down with your handtool and give it a scrub.
-
It should work fine at the standard 1 scoop per 10 litres.
-
Thanks chaps. I'll still use acid rinse after the clean to make sure... especially on wool.
Anyone had any issues with it on wool?
-
Don't waste your money on acid rinse it can't be neutralised
-
only used f90 a few times as a pre-spray but 95% of the time as a rinse.
Use it on wool all the time, never a problem.
If doing textile that takes longer to dry (for example, Berber) and i've had to hit it with a higher ph pre-spray, then I'd tend to acid rinse instead to avoid potential browning probs.
-
Compared to just a normal water only rinse I would say F90 will give your cleaning a big boost when extracting... Don't rely in it to do all the cleaning though, been using Formula 321 as my pre spray and this achieved excellent results
-
Formula 90 dosent need rinsing as it self neutralises and dries to a christaline powder like encap and just vacumes away, ive used the stuff since 1999 but my prefered chemspec powder is f70 by far
Stuart