Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: ok cleaning on November 15, 2014, 02:16:51 pm

Title: Pump and controller wiring diagram
Post by: ok cleaning on November 15, 2014, 02:16:51 pm

Anyone have the link for a sure flow pump and controller wiring diagram ? Would be great thanks

Title: Re: Pump and controller wiring diagram
Post by: neiljoust on November 15, 2014, 02:42:54 pm

Red wire goes to the + ( with a fuse ) on your leisure battery and black goes to your -

Blue wire goes to the black wire on your pump

and brown wire goes to your red wire on your pump 

Title: Re: Pump and controller wiring diagram
Post by: ok cleaning on November 15, 2014, 04:58:15 pm

Thanks very much , what happens to the red pressure switch wires

Title: Re: Pump and controller wiring diagram
Post by: Spruce on November 15, 2014, 07:00:50 pm

(http://www.cleanitup.co.uk/smf/1416078049_Shurflo pump wiring to Varistream.jpg)

I did this for someone who wanted to connect a Shurflo pump up to a Varistream Controller. The wires from your controller may be a different colour.

Title: Re: Pump and controller wiring diagram
Post by: Dave Willis on November 15, 2014, 07:04:00 pm

http://www.williamsonpumps.com/ekmps/shops/wpltd/resources/Other/varistream-vsd6-quick-start-guide-aug-2011.pdf


Slightly different if you have a Spring controller - pressure switch is wired in.

Title: Re: Pump and controller wiring diagram
Post by: johnny bravo on November 19, 2014, 08:50:32 pm

just checking,       how the hell did wagga burn his out then    when wiring his up in his youtube videos,  van mount set-up
whats the reason 2 red wires are clipped securelly into the shurflo pump head.     leave them 2 alone and just concentrate on the 2 loose wires to connect to the controller,


thanks guys

got leisure battery today,      what a weight.     is it right you should remove the terminal covers and store outdoors for safety,   states a fire could be caused if you leave covers on battery

Title: Re: Pump and controller wiring diagram
Post by: Spruce on November 19, 2014, 09:05:42 pm

Wagga got his polarity wrong on his controller. Easiest and quickest way to damage it.

Title: Re: Pump and controller wiring diagram
Post by: Ian Sheppard on November 20, 2014, 09:30:29 am

This is a link to the Spring manufactured controls http://www.springltd.co/node/44

As above the control is designed to operate with the pump pressure switch in line. Please do ensure you fit a fuse in line between the battery and control on the positive (Red)