Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: johnny bravo on November 02, 2014, 11:45:40 am
-
Alex, your waterflow controllers on your backpacks, would it be possible for the 3 yellow wires to come with the end crimp fittings connected, i think there male fittings, so i can push fit the wires tothe other wires .
i hope you can work out what i mean.
i dont have them end wire conector fittings.
-
theres a lot of wires to reconnect ,, ???, not as straight forward as i thought :'( :'(
-
Eureka, found it at the bottom of base, looks more baffling than the WCW one, of which i had a few .
6 wires all togeather,
4 Red
2 Yellow.
connecting to different pushfit fittings,
you need a quallified bomb disposal engineer for this small task
-
It is slightly simpler than it looks.
To replace the On/Off switch all of the wires simply pull off the connections that are hidden under the black sheathing. This allows the new part to simply be push-fitted back together.
The same with the Flow Speed Controller - most are plug-in connectors.
-
Alex recieved today, a big relief when items for the backpack arrived, they all had the end trminal fittings on, a case of disconnection item and replacing. ;) ;D
With the WCW backpack speed controllers etc, you were having to cut all the wires and rejoin again,
Alex do you still sell the V2 bACKPACK, MAY INVEST IN ANOTHER ONE JUST AS SPARE IN CASE HAPPENS AGAIN.
GREAT SERVICE,
Thankyou.
Dont want to get the ladders out again now, off putting, when you get used to the WFP. cleaning
-
Alex recieved today, a big relief when items for the backpack arrived, they all had the end trminal fittings on, a case of disconnection item and replacing. ;) ;D
With the WCW backpack speed controllers etc, you were having to cut all the wires and rejoin again,
Alex do you still sell the V2 bACKPACK, MAY INVEST IN ANOTHER ONE JUST AS SPARE IN CASE HAPPENS AGAIN.
GREAT SERVICE,
Thankyou.
Dont want to get the ladders out again now, off putting, when you get used to the WFP. cleaning
We have now switched all production to the new V3 backpacks so are no longer selling the V2 version.
-
Alex would there be any potential problem with using the backpack for spraying diluted TFR.
It's out of warranty now!
Thanks Alan
-
Alex would there be any potential problem with using the backpack for spraying diluted TFR.
It's out of warranty now!
Thanks Alan
None at all. After spraying any chemicals I would recommend flushing through fully with pure water afterwards to avoid any contamination.
-
I've one for windows and one purely for fsg which certainly helps.
Thanks Alan