Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: tonyoliver on October 31, 2014, 08:07:23 pm

Title: MOSMATIC NOZZLES
Post by: tonyoliver on October 31, 2014, 08:07:23 pm

hi guys got a 21"mosmatic flat surface cleaner with 1505 nozzles on a 15l/min machine  but it doesn't seem to clean block paving well I need to go over it with the turbo can you recommend a better nozzle set up to clean blocks

Title: Re: MOSMATIC NOZZLES
Post by: Blast Away on October 31, 2014, 09:27:10 pm

15LPM at 200 Bar?

If so you need 2 x 1502 or 15025.

2 x 1505 would be for 30LPM at 200 Bar.

Your problem is loss of pressure because your nozzles are too big for your pump size, presuming your pump is 200 Bar at 15.

Title: Re: MOSMATIC NOZZLES
Post by: tonyoliver on November 02, 2014, 10:12:32 pm

thanks will order new tomorrow  your a star

Title: Re: MOSMATIC NOZZLES
Post by: Blast Away on November 03, 2014, 07:33:38 pm

Mosmatic nozzles are 1/8 rather than the standard 1/4 thread