Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: jason1 on October 17, 2014, 01:49:20 pm

Title: van floor protection
Post by: jason1 on October 17, 2014, 01:49:20 pm
What is the best way to protect floor in back of the van? Any help appreciated Thanks
Title: Re: van floor protection
Post by: DaveG on October 17, 2014, 02:19:32 pm
Fibreglass, get a kit on Ebay for around £60
Title: Re: van floor protection
Post by: chez on October 17, 2014, 02:46:52 pm
Fibreglass, get a kit on Ebay for around £60

+1
Title: Re: van floor protection
Post by: EandM on October 17, 2014, 02:48:41 pm
Run a pick up...
Title: Re: van floor protection
Post by: martin hulstone on October 17, 2014, 02:55:14 pm
Depends how long you are keeping your van? if for more than 5 years and you use it every day i would suggest speedliner. costs about a grand(vivaro) but it is in penetrable. Its basically the same as a shower floor. goes about six inches up the side of the van. I think its well worth the money if it is a newish long term van.
Title: Re: van floor protection
Post by: SeanK on October 17, 2014, 04:00:20 pm
The handiest way would be to paint it using Protectakote paint, clean and sand the floor first.
It doesn't bond well to a gloss finish. Make sure you mix in a hardener and you will need a new brush between
coats so just buy a pack of cheap brushes.
As long as you put a mat under anything that could scrape it then it will more than last the life of the van.
The problem with fibreglass is if moisture gets between it and the floor ( and there are many reasons why this
can happen ) then it has nowhere to go and if your floor starts to rot you will have no way of knowing.



Title: Re: van floor protection
Post by: mufcglen on October 17, 2014, 04:26:47 pm
Anyone used garage floor paint on plywood lining?
Title: Re: van floor protection
Post by: Spruce on October 17, 2014, 04:49:35 pm
Anyone used garage floor paint on plywood lining?

The problem with leaving the ply floor in is that water gets underneath it, never dries out and the rusting process starts. A mate of mine left the ply floor in and protectakoted over the top.When he lifted the floor it was soaking wet.

The other issue is that the tank also 'sweats', especially in cold damp weather, so you will always have damp between the tank and the ply floor. I would prefer the steel floor to have a coat of protection.
Title: Re: van floor protection
Post by: Richard ham on October 17, 2014, 08:54:46 pm
Linex
Title: Re: van floor protection
Post by: PoleKing on October 17, 2014, 11:40:01 pm
Ime, fibreglass is the only way
Title: Re: van floor protection
Post by: Spruce on October 18, 2014, 08:13:59 am
Linex

Hi Richard

Have you any idea what it costs to have a small (say Berlingo size) to medium size (say Transit swb) van treated with Line-x?
Title: Re: van floor protection
Post by: Richard ham on October 18, 2014, 03:30:04 pm
Couple hundred. My vivaro has the floor and walls and rear doors covered it was approx £400 , i think floor was 200 ish.
Title: Re: van floor protection
Post by: JSMC on October 19, 2014, 11:44:20 am
i'd use protectakote paint over fibreglass. as has been said if fibreglass cracks water will get under it. With protectakote so can see if it is wearing out etc. easily remedied also.