Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: trippyboy on October 12, 2014, 05:35:39 pm
-
Hi Alex, have you stopped selling your 10 and 14 " carbon goosenecks?
-
Hi Alex, have you stopped selling your 10 and 14 " carbon goosenecks?
No, if you look in the descriptio here there is a link to them:
http://www.gardinerpolesystems.co.uk/acatalog/super-lite-carbon-fibre-quick-release-gooseneck.html
Taking you here: http://www.gardinerpolesystems.co.uk/acatalog/QUICK_LOQ_CARB10.html
and here:
http://www.gardinerpolesystems.co.uk/acatalog/QUICK_LOQ_CARB14.html
-
Not very neat though. There should be a link here:
http://www.gardinerpolesystems.co.uk/acatalog/Goosenecks_.html
-
All of our new Quick-LoQ goosenecks are listed in the QuicK-LoQ gooseneck section:
http://www.gardinerpolesystems.co.uk/acatalog/Quick-LoQ-Gooseneck-System.html
We do still have the 25" in the old style along with the 90° version - http://www.gardinerpolesystems.co.uk/acatalog/Super-Lite__Carbon_Fibre_Goosenecks.html
-
All of our new Quick-LoQ goosenecks are listed in the QuicK-LoQ gooseneck section:
http://www.gardinerpolesystems.co.uk/acatalog/Quick-LoQ-Gooseneck-System.html
We do still have the 25" in the old style along with the 90° version - http://www.gardinerpolesystems.co.uk/acatalog/Super-Lite__Carbon_Fibre_Goosenecks.html
Ahh. I see it now. Like Trippy probably my eye was srawn to the old one: Super lite Carbon Fibre Goosenecks. Anyway, just ordered mine. :)
-
Hi Alex, little bit confussed (easily done)
I have a 10" carbon gooseneck bought from yourself about 3 years ago,
Its on a 3 year old slx 30, this is now split at the base so looking to renew,
and actually upgrade to 14".
My gooseneck simply fits in to a top pole clamp and I release it by opening the clamp up,
pulling off the straight connector from brush hose to pole hose, to remove gooseneck
and replace with normal brush with built in plastic angle adapter, with alu male threaded
bar.
If I order the new 14" quick loc gooseneck will it fit my set up?
Cheers trippy
-
yes it will , the way it fits the pole is the same ......the quiklock part means you can change just the brush quickly without removing the gooseneck .
-
yes it will , the way it fits the pole is the same ......the quiklock part means you can change just the brush quickly without removing the gooseneck .
cheers
-
Hi Alex, little bit confussed (easily done)
I have a 10" carbon gooseneck bought from yourself about 3 years ago,
Its on a 3 year old slx 30, this is now split at the base so looking to renew,
and actually upgrade to 14".
My gooseneck simply fits in to a top pole clamp and I release it by opening the clamp up,
pulling off the straight connector from brush hose to pole hose, to remove gooseneck
and replace with normal brush with built in plastic angle adapter, with alu male threaded
bar.
If I order the new 14" quick loc gooseneck will it fit my set up?
Cheers trippy
Apologies for the delay in replying.
To start using the Quick-LoQ System goosenecks you would need to unscrew the Super-Lite carbon gooseneck from the brush stock and then screw on a QuicK-LoQ brush socket - http://www.gardinerpolesystems.co.uk/acatalog/QUICK_LOQ_Socket.html in its place.
Then the new Gooseneck would simply click into place on the brush head.