Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: richywilts on October 08, 2014, 02:47:20 pm
-
ive got a combo van with a small metal bulkhead about 12-15 inches high, i get quite a bit of water in the back thru various leaks etc is there any way i could stop the water running down and under the bulkhead in to the cab the carpets are a bit wrecked and soaked thru now, ive not looked at it yet just thought id post on here first see what ideas people come up with as just taking it local car wash for a valet
-
Fibreglass it Richy
-
When I had mine I just removed the rubber bungs out of the floor pan all the water drains straight out 😝
Darran
-
common fault apparently ... my combo came with no carpets and no rubber bungs in floor .... I pretend its a rally car ;D ... (I don't really honest) ...
my advice rip carpet out ... remove bungs .. clean windows and don't waste time on it :)
-
Stop the various leaks ::)roll.
No leaks in my van....bone dry :P.
-
Iv got a boot lining tray in mine made specifically for the combo, any leaks dont spill over, best £30 iv spent
-
Iv got a boot lining tray in mine made specifically for the combo, any leaks dont spill over, best £30 iv spent
Yeah i had one fitted in mine a few years back. Lovely.
-
Iv got a boot lining tray in mine made specifically for the combo, any leaks dont spill over, best £30 iv spent
Yeah i had one fitted in mine a few years back. Lovely.
It was you that told me about it and gave me the link :)
-
yeah i seen the link you put up the other week just mean ripping out the system and rebolting it all back in again it was tricky last time
also where are the rubber bungs that people have mention
-
Combos leak through from under the bonnet into the driver door-well. A seal goes in the bulkhead, I think it's the one where the steering wheel column goes through the metalwork.
-
Use the membrane and sealer the roofers use.The none heat one.