Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: scrubbitt on September 15, 2014, 02:57:06 pm

Title: Cleaning wand
Post by: scrubbitt on September 15, 2014, 02:57:06 pm

Could anyone tell me the best way to clean a wand
Out used sink unblocker before
Is there a better way
Thanks

Title: Re: Cleaning wand
Post by: Frank pole on September 16, 2014, 08:28:46 pm

If you want to clean the solution line out then take off jets and filters if fitted, fill your solution tank with some hot water and pull wand trigger until you have flushed all tank water through solution line then clean jets and filters and refit.

Why do you need to clean wand? What problems are you having?

Title: Re: Cleaning wand
Post by: John Kelly on September 16, 2014, 08:38:58 pm

Some wands have small burrs on some of the internal welds. These collect fluff and debris. I have seen them where the vac has been virtually closed off.

Title: Re: Cleaning wand
Post by: Adrian Walton on September 16, 2014, 09:18:45 pm

I"ve had a hair grip before get caught in the wand and then get lots of fluff stuck around it.you need to use something like a hacksaw blade to get it all out.