Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: ok cleaning on September 05, 2014, 08:39:19 pm

Title: under bumper ports
Post by: ok cleaning on September 05, 2014, 08:39:19 pm

bit confused oh how this works , what bits off the page would i need to get to do this   thanks
 
http://www.grippatank.co.uk/liquid/105/reels-hoses-connectors/hose-connectors-fittings/qr-metal-couplings.html

Title: Re: under bumper ports
Post by: martinw on September 05, 2014, 08:47:29 pm

are you going to run it via hose to ports or tubing?
the latter requires : port bracket, qr shut off coupling 3/4, push fit 3/4 thread
1st option add to shopping hose plug and straight through.

Title: Re: under bumper ports
Post by: Spruce on September 05, 2014, 09:01:07 pm

I would use

1 x Quick Release shut off coupling with 3/4" male thread.

1 X slimline steel locknut.

I would then order

1 X Brass hexagon 3/4" female nut and 1/2" hose tail (flat seat) complete with leather sealing ring.

http://www.lsengineers.co.uk/brass-hexagon-nut-and-hose-tail-fitting-flat-seat.html

part no: 242312

That will sort out the van port side if you are using ordinary 1/2" hose.

From van port to hose reel.

1 x Quick Release metal hose plug with 1/2" hose barb.