Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: mark mids on September 01, 2014, 06:31:27 pm
-
Hi Guys
At the moment im just running a my water straight through my 25ltr di vessel but its costing me a fortune in resin, I think its time I got myself another RO, the last one I had was a merlin but it was to slow as I don't have the best water pressure, what do you guys have and what do you recommend? should I go for a 4040?
Cheers in advance :)
-
4040 all the way. Get one with a HF5 membrane.
-
Cheers for that Pete, does anyone have a link to a supplier?
-
Hi Guys
At the moment im just running a my water straight through my 25ltr di vessel but its costing me a fortune in resin, I think its time I got myself another RO, the last one I had was a merlin but it was to slow as I don't have the best water pressure, what do you guys have and what do you recommend? should I go for a 4040?
Cheers in advance :)
running 4040s you need good tap pressure 40 psi minimum and that's even bad really.
-
Gaps water do the hf5 4040 with two ten inch pre filters that you assemble yourself(easy peasy) for about 600 quid and then buy a clarke 240e pump from machine mart to get the pressure right up for about 300.gets tds down to around 7 and fills a 1000ltr tank in about 4 hours with a 60/ 40 waste ratio. hope that helps
-
get a 450gpd ro with a booster pump, will make 600+ litres of pure water overnight,
costs far less than a 4040 ro
-
I got this one
http://www.vyair.com/scripts/prodView.asp?idproduct=370
they do other membranes, notably the eco 4 which is apparantly equal to an hf5 in performance only cheaper
-
Sorry but if you live in a soft water area and can produce the water you need whilst out at work into a static tank or into your van tank over night YOU DO NOT NEED A 4040 plus save yourself some money .
I live in a soft water area and i got a 450gpd RO from www.daqua.co.uk for £180.00 inc delivery which fills my 300 ltr static tank whilst out at work in less than 8 hrs . Mike
-
I live in a hard water area, my water tests at 357 tds, and as im on a water meter I need to fill up asap...
-
A smaller ro may take longer but does not mean a greater use of water it's just a lot slower getting through the system
The best ro depends on your daily useage and future requirements, if you only intend to be a one man operation and have a place to keep a 1000 ltr ibc then a small 450 ro will do you.
Otherwise it's worth the investment of a Merlin or 4040 both should be run with a decent booster pump and double di resin bottles
S
The Merlin is more wasteful with water and is slower than a 4040 the Merlin can do 100 ltrs an hour easy my 4040 is in the 200+ p/h range
Merlin is much easier to setup and cheaper to buy and would last years when changing the the prefilters regularly
Darran
-
Thank you for your replys, i was looking at the 4021, the third one down £400 with delivery, any good? www.daqua.co.uk/ro_systems.htm
-
If you're on a water meter then you need one that puts out a minimum of waste water - even on the best systems with good water pressure 1 part pure to 1 part waste is about the best you can get without prematurely killing membranes - and water pressure is a big factor in both the waste/pure ratio and the output tds (as well as speed of production) so if your budget is limited I'd recommend getting a smaller pumped system rather than a larger un-pumped one.
-
Find out your water pressure first no point in buying a ro if the tap pressure ain't going to run the ro to its best, then decide whether you need a booster pump and what size ro you would need, if you fill straight into your van you might need a big ro for quicker filling time, but if you use a static system you could get away with a smaller one.
-
Hey Mark I don't want to hijack your thread but do you get many people using your photo quote on your website?
Thanks.
-
Hi robert....yes i do get alot of ppl use it...itsend pic straight to my phone.