Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Mr Sparkle on July 21, 2014, 09:31:27 pm

Title: Please help me
Post by: Mr Sparkle on July 21, 2014, 09:31:27 pm

Desperately need a booster pump as I'm using too much resin with my very slow water production!
Would this pump fit my merlin?
http://www.purefreedom.co.uk/24v-aquatec-reverse-osmosis-booster-pump-power-supply-p-274.html

If not can you recommend one that will ?

Title: Re: Please help me
Post by: Smudger on July 21, 2014, 09:37:41 pm

Don't get that it's not suitable.

I linked you a pump in the other thread, and others have suggested the Clarke pump

Best regards

Darran

Title: Re: Please help me
Post by: Mr Sparkle on July 21, 2014, 09:47:37 pm

Thanks Darren  think will get the clerkes one you suggested!
Was just hoping I could get one a little cheaper.
Was hoping any would fit a merlin

Title: Re: Please help me
Post by: 8weekly on July 21, 2014, 09:51:01 pm

I have the same problem Mr Sparkle and bought the Clarke pump without the controller.

Title: Re: Please help me
Post by: Barryy on July 22, 2014, 01:50:12 am

Quote from: Mr Sparkle on July 21, 2014, 09:31:27 pm

Desperately need a booster pump as I'm using too much resin with my very slow water production!
Would this pump fit my merlin?
http://www.purefreedom.co.uk/24v-aquatec-reverse-osmosis-booster-pump-power-supply-p-274.html

If not can you recommend one that will ?

I have that Aquatec pump on my 450 RO system for the last 3yrs, works perfectly, increased pure production significantly. Also you can let it run dry with no probs. You can get it here for a little less expensive: http://www.windowcleaningwarehouse.co.uk/ROBPU.html

Title: Re: Please help me
Post by: Smudger on July 22, 2014, 06:37:16 am

There is a big difference between the requirements in pressure and production speed between a 450 RO and a Merlin.

Any pump will fit the Merlin, you may need to buy the correct fittings tho.


Darran

Title: Re: Please help me
Post by: Mr Sparkle on July 22, 2014, 10:23:24 am

Would this pump be powerful enough for merlin
http://www.machinemart.co.uk/shop/product/details/051012600?da=1&TC=SRC-booster%20pump

Title: Re: Please help me
Post by: CleanClear on July 22, 2014, 10:27:26 am

We've been running this pump for two years now (maybe a bit longer), not had any problems with it. We've used it on the Merlin and its also used on out 4040's. Its not auto cut off.

http://www.machinemart.co.uk/shop/product/details/051012200

Title: Re: Please help me
Post by: Mr Sparkle on July 22, 2014, 11:11:01 am

Thanks crystal clear, that's a brilliant price, well chuffed at that!
Is it easy to install with a merlin?

Title: Re: Please help me
Post by: Avo on July 22, 2014, 06:46:53 pm

Quote from: CleanClear on July 22, 2014, 10:27:26 am

We've been running this pump for two years now (maybe a bit longer), not had any problems with it. We've used it on the Merlin and its also used on out 4040's. Its not auto cut off.

http://www.machinemart.co.uk/shop/product/details/051012200

what kinda psi will this produce crystal ?