Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: Richy L on July 11, 2014, 05:16:00 pm
-
Anyone selling a small-ish pressure washer.
Needs to be a genuine honda, yanmar, etc. good make - needs to be reliable.
-
Anyone selling a small-ish pressure washer.
Needs to be a genuine honda, yanmar, etc. good make - needs to be reliable.
Iv got 1 richy, i was going to keep but iv got too many already....yanmar L100 with a gearbox and an interpump ws201. Im putting a new k-series 5.1 unloader next week, changing all of the oils and painting all the frame. I want £600 for it
Danny
-
2hrs? Surely an hour tops? Done a few bins on occasion and personally I hate it.
-
Anyone selling a small-ish pressure washer.
Needs to be a genuine honda, yanmar, etc. good make - needs to be reliable.
Iv got 1 richy, i was going to keep but iv got too many already....yanmar L100 with a gearbox and an interpump ws201. Im putting a new k-series 5.1 unloader next week, changing all of the oils and painting all the frame. I want £600 for it
Danny
if richy doesnet want it, leave the paint job and unloader and sell it me for 450? ;D
-
Anyone selling a small-ish pressure washer.
Needs to be a genuine honda, yanmar, etc. good make - needs to be reliable.
Iv got 1 richy, i was going to keep but iv got too many already....yanmar L100 with a gearbox and an interpump ws201. Im putting a new k-series 5.1 unloader next week, changing all of the oils and painting all the frame. I want £600 for it
Danny
if richy doesnet want it, leave the paint job and unloader and sell it me for 450? ;D
So you can put an unloader on, paint it yourself and sell it on ebay for 800? ;D ;D
-
maybe, or use the engine / frame / etc for other things.... who knows, I just love these machines and love to do them up, sell them, use them, make love to them ;D
Look at this this way, youd be buying an unloader, buying oil, spending time sanding the frame down, getting full of crap, then you've got to take the machine off the frame to sand and paint it properly, all for 150? ;D
-
Lee has made machine repairs sexy.
Lee is the Michael Buble of pressure washing ;D
Rob ;D
-
Ill have a think about it lee, i might be buying a couple other machines so ill see how much room iv got.
Rob i prefer to think of lee as the jimmy savile of the pressure washing world
Danny
-
I have a Karcher HD830BS.. Has the Honda GC160 just been through Karcher service centre so it runs and works well.. £300
-
Now then, now then - you can't say that Danny
Rob ;D
-
Do you have any pics? and the basic specs of the machines (LPM, bar, fuel type...)?
You can email me the pics to richard@leeksons.com if its easier.
Any where are you? Im in Chepstow
-
The spec is all on the Karcher website.. I think its 10 litres per minute but don't quote me on it. It runs on unleaded. Starts straight away and I put a new 12m hose on it.. Been used for one job by me.. I will dig out photos if you like and email them
-
Do you have any pics? and the basic specs of the machines (LPM, bar, fuel type...)?
You can email me the pics to richard@leeksons.com if its easier.
Any where are you? Im in Chepstow
No pics at the moment mate but will have over the next few days. Its a diesel 10hp single cylinder yanmar L100, the pump is an interpump ws201 which gives out 15lpm at 3000psi. The pump is driven via a reducer gearbox for longer pump life. Its a normal pull start but can be started easily, I can start it with one hand. Its on a red hilta yanmar frame.
That enough I do mate?
Danny
-
Thanks both.
I would like to see some pics please guys as I will need to put it in my van for some jobs as well as my usual pressure washer and other stuff, so I need to see it it will fit.
Where are you both based?