Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: mr muzzy on June 28, 2014, 06:01:35 pm

Title: prochem pro 35
Post by: mr muzzy on June 28, 2014, 06:01:35 pm

  prochem pro 35 I am thinking about buying one of them ,for agitation and
pile lifting for hwe ,encap lmc , and hard floor cleaning ,anyone seen any reviews or know anything about them thanks

Title: Re: prochem pro 35
Post by: Jamie Pearson on June 30, 2014, 04:59:26 pm

They are a good bit of kit.
Essentially a big brother to the TM4 machine (my TM4 is about 15 years old now) but designed for wet use.

Title: Re: prochem pro 35
Post by: Jamie Pearson on June 30, 2014, 04:59:58 pm

However for most LM jobs you will get better results with a rotary. Not all, but most.

Title: Re: prochem pro 35
Post by: mr muzzy on June 30, 2014, 06:30:35 pm

thanks for the reply did not think I was going to get one  ???,what  rotary would you say was best for lm thanks ,15 years is good going must be well made your tm 4

Title: Re: prochem pro 35
Post by: Jamie Pearson on June 30, 2014, 06:49:56 pm

I personally would go for a 17" machine with a good weight to it. Your choice will depend on how easily you can physically move the machine.

There are many good brands of machine out there. Just get a 150-200 rpm machine and something fairly current.

We sell a lot of Truvox Orbis machines both used and new and have 6 of them ourselves. Oldest is 12 years old and still going strong.

Most last well. Just beware of the Viper/Nilfisk machines as I suspect they have issues with motors at the moment. Had a few go pop which isnt right for a rotary machine.

Title: Re: prochem pro 35
Post by: mr muzzy on June 30, 2014, 07:52:09 pm

thanks very much for your advice ,I will look at your website cheers

Title: Re: prochem pro 35
Post by: Jamie Pearson on June 30, 2014, 07:58:54 pm

There is a decent used Numatic somewhere in the used section I think.

Be a good starter machine. Its presentable enough anyway.