Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Bob Allen on June 26, 2014, 08:26:09 pm
-
Today I was taking the Y strainer filter off to clean
(the one that is on the side of the water tank)
and the joint came away from the water tank leaving just a hole
can anyone suggest a quick fix to get me back working again as im losing money having to postpone work
Ps it a Hydramaster Boxer 421
-
Bob,
Stuff a cloth in it to block up the hole.
Don't fill the tank fully.
Live feed the machine and don't use the tank.
Simples
Simon
-
I thought Simon had changed his user name again. From Major Clean it Up .... ;)
;D
-
This will repair it.
http://www.halfords.com/motoring/auto-parts/car-tape-glue-velcro/evo-stik-hard-fast-metal-epoxy-putty
-
Thanks Simon
Im thinking if i can block that hole with something similar to that epoxy stuff then i couls attach a longer hose from small pump directly into tank, failing that drilling a whole nearer the front of the tank and having a new connection fitted, would that work?
-
I have used something similar to what Simon is suggesting on portys many times and has worked a treat.
-
Bob,
Try and get it welded if you can.
Best to get a patch over it as the aluminium has probably corroded over the years.
Simon
-
Stick your old chap in it Bob. Then again, might need something a bit more substantial!! ;D
-
It prob only broke Mr Clive Ware, because you had looked at it at some point, you Jinx :)