Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: Kevin Miller on June 26, 2014, 11:11:44 am

Title: Whirlaway advice
Post by: Kevin Miller on June 26, 2014, 11:11:44 am

Looks like I'm gonna be able to pick up a 18" whirlaway. My machine is yanmar 200bar, 15 lpm. Is this good enough to run the whirlaway. Also what size nozzle is best for a 18" whirlaway for that type of machine or are they all the same size.

Title: Re: Whirlaway advice
Post by: Matt Gibson on June 26, 2014, 11:19:57 am

Yes it will run it.

You want 2 x 15 degree/025 nozzles.

Title: Re: Whirlaway advice
Post by: wpclean on June 26, 2014, 01:32:07 pm

I have the same machine, and it runs the fsc perfectly, I don't find it any faster than using a lnace, it is just easier on the old back  ;D

Title: Re: Whirlaway advice
Post by: Kevin Miller on June 26, 2014, 02:40:29 pm

Thanks gents

Title: Re: Whirlaway advice
Post by: Kevin Miller on June 26, 2014, 02:49:29 pm

Quote from: Matt Gibson on June 26, 2014, 11:19:57 am

Yes it will run it.

You want 2 x 15 degree/025 nozzles.

Ps can you give me a link on where to buy these from. Looked on q washers and struggling to find them.
Thanks

Title: Re: Whirlaway advice
Post by: Matt Gibson on June 26, 2014, 03:33:23 pm

eBay mate. just search jet wash nozzles. There are a few people that sell them. you just order 2 and pick the degree and nozzle size.

Title: Re: Whirlaway advice
Post by: Darren O on June 26, 2014, 05:06:20 pm

Qwashers will sell them even if there not on there website.

Title: Re: Whirlaway advice
Post by: PWP on June 26, 2014, 06:13:02 pm

We sell them at £3.00 each if your interested