Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: laustin956 on June 23, 2014, 09:16:50 pm

Title: K5.2 unloader
Post by: laustin956 on June 23, 2014, 09:16:50 pm

What's the best way to set up a k5.2 unloader on a honda gx390 with a ws202 pump.

Title: Re: K5.2 unloader
Post by: BDCS on June 23, 2014, 11:51:23 pm

They come pre set as they monitor flow not pressure - you buy the valve in the range that suits your pump flow

Title: Re: K5.2 unloader
Post by: laustin956 on June 24, 2014, 05:11:46 am

Hi it was set but been using it for a few hours and the nut has come loose on top

Title: Re: K5.2 unloader
Post by: BDCS on June 24, 2014, 08:09:52 pm

wind it out - then you need it wound it just to the point where there is just a slight bit more with the trigger out than in