Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Shaun_Ashmore on June 08, 2014, 01:48:48 pm

Title: Envirodri
Post by: Shaun_Ashmore on June 08, 2014, 01:48:48 pm

 Just before I start wrecking it, how do you change the brushes?

I'm guessing it's undo the screw and Allen screw at either side?

Shaun

Title: Re: Envirodri
Post by: derek west on June 08, 2014, 04:14:26 pm

mine used to just knock through (none allen key end obviously) with a screwdriver and hammer, light tap should do it.

Title: Re: Envirodri
Post by: davep on June 08, 2014, 04:52:04 pm

Yip can take a good whack so watch ya fingers

Title: Re: Envirodri
Post by: peter maybury on June 08, 2014, 05:03:01 pm

shaun the shaft in the middle of the brushes just knocks through and comes out allowing the brushes to just fall out. Just make sure that you identify which side they come out.
It they have not been removed for a while they will want quite a hard sharp tap to get them moving.
Peter

Title: Re: Envirodri
Post by: Shaun_Ashmore on June 08, 2014, 05:35:32 pm

It's been that long since I've had an envirodri I'd forgotten, thanks very much.

Shaun