Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: matt on March 25, 2006, 11:19:20 pm

Title: Gaz's brush's
Post by: matt on March 25, 2006, 11:19:20 pm
Cheers for the brush's Gaz

now i guess i need to trim some bristles away, how many lines of them are people doing (just to give me a idea)

also, the connection to the pole, the head doesnt have a screw fitting, i guess the answer is a bolt through the unger end fitting and the bruh head

I plan to fit 2 "small holed spray jets" and the bulk head connections

Title: Re: Gaz's brush's
Post by: H h20 on March 26, 2006, 09:20:00 am
Hi Matt,you will need a pair of pliers and a knife(not sharp) a normal one you use for eating with will do,then count 2 rows up from the bottom and part the bristles with the knife and you will see that they are in rows,it is the 3rd row you will need to remove but don`t go all the way to the ends of the brush you should remove exactly 16 bristles in 1 perfect row before they start to go off line and then remove 2 bristles above where you stop on the long row at the ends,to remove them just pull them  out with the pliers making sure you pull them from the very bottom of the bristle where they are fixed in the head,then you will be able to place your jets where you need them,
now for the fitting for the thread to pole,it is best to use the addaptors i supply one for the brush and one for the pole,
heres a couple pics of how it should look,Gaz  ;)
Title: Re: Gaz's brush's
Post by: matt on March 26, 2006, 12:52:55 pm
cheers mate

i will have a go in the week